Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rebuilding a high mount winch.prob removing gears

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Rebuilding a high mount winch.prob removing gears

Post by 4sum4 »

I`m stripping down an older WARN high mount winch and I`ve got down to were the barrel seperates from the gear box but there is a plate that won`t come out ,this is were i`m stuck cause the gears have to come out and I need to sepaerate the barrel.
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

http://www.pirate4x4.com/tech/billavista/8274/
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

Thanks tried that but can`t get the plate to turn around like in his pics
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

himount

Post by china »

doesn't it slid vertical ? that how mine came apart..
Top
Posts: 71
Joined: Mon Sep 13, 2004 12:50 pm
Location: Melbourne

lift and seperate

Post by Not For Highway Use »

The plate has a keyway. You need to lift it up and about 8mm and then remove the countershaft. Note make sure you are ready to catch the ballbearing when you remove the brake housing from the countershaft.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests