Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ring gears

Tech Talk for Jeep owners.

Moderator: GUtripper

Forum rules
Post Reply
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Ring gears

Post by bulldogy »

Hey guys posting for a mate .
He has a Jeep J20 1981 model dana 60 rear 44 front .
He wants me to get him a set of precision gears from the US from reider racing thats who i buy all my toyota stuff from.
Anyway on there site and a few others they give diff part# eg he wants 4.1
On Reider site they state 44D/410+ extra thick for the dana 44
For the dana 60 they say 60D/410
I dont know if the dana 44 + gear is gunna fit his front diff can anyone shed some light on this for me please
They also have 4.09 and avail in both but no mention about thickness need too order asap any help very much appreciated.
Thanks Dave
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

there are 2 different centres avail on a d44. upto 3.73 ond over 3.92


if you have the upto 3.73 ratio centre, to change to over 3.92 you need to either change the centre, run a spacer or get extra thick gears.

what ratio was it originally?
is it high or low pinion?
these are things you will need to know for getting the part number.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Ok thanks will see the truck on sunday so will be able to tell whether its a hi pinion or not.
It had a diesel motor in it original not sure what ratios but will find out on sunday and post .
Cheers dave
Top
Posts: 58
Joined: Sun Apr 06, 2003 10:48 pm
Location: Anchorage,Ak

Post by ODD BALL »

That front D-44 in his J-truck should be a low pinion.
It's easy to play, but hard to learn!
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

J20 is low pinion - well ours is......
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Ok
Saw the truck today it has the dana 44 low pinion.
The ratios are now 3.73.
Does he have to do a carrier change in both diffs ?
Also on the reider site they do the 4.1 thick is this to use for a carrier so you dont have to change ? eg 3.73.carrier using 4.1 gears
Cheers dave
Top
Post Reply

Return to “Jeep”

Who is online

Users browsing this forum: No registered users and 0 guests