Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

disco diff lock

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 30
Joined: Sun Jan 23, 2005 3:50 pm
Location: Mt.Evelyn, Melbourne.

disco diff lock

Post by natanchris »

Hi guys, i've recently purchased a '97 tdi auto, and i want to fit a rear locker. I've put in a 2" lift and am running 225/75 BFG a/t's. I am not planning on going up much more in diameter until these boots are knackered, will probably stay pretty standard....and i don't drive with a heavy right foot. Would an ARB airlocker be ok with standard axles etc, as i'm not really into rockhopping, and on limited budget(aren't we all?)....any thoughs and suggestions would be appreciated.
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

for the rear i think thers not to much difference in price between a maxi-drive and an arb, taking into acount the cost of the air compresser. just ring around and get some prices. if you can afford it, MAXI-DRIVE :D where are you located?
serg
Posts: 30
Joined: Sun Jan 23, 2005 3:50 pm
Location: Mt.Evelyn, Melbourne.

disco diff lock

Post by natanchris »

serg, I've already got an ARB compressor. What do m/d use for actuation, is it vacuum or solenoid or would the compressor be needed?? Can anyone give me an idea of the cost for a rear m/d?? Ta Chris.
Posts: 32
Joined: Wed Dec 17, 2003 7:11 am
Location: Athenree, New Zealand

Post by SOLIHL »

ARB is cheaper than Maxidrive, as for strength etc ARB with stock axles may be OK for what you do. My thinking is if you are gentle, go the ARB route, you can upgrade axles if/when you break them.
Myself, i have a maxidrive and have never looked back!
Kevin
Posts: 33
Joined: Sat Jan 22, 2005 6:43 am
Location: Burringbar Northern NSW

Post by billybus »

If you're not rock hoppin then I may just have the rear end for you...

It's a Quaife torque biased LSD, and driveshafts/flanges

Fully automatic no compressors etc and bomb proof.

Costs $2100 new I'm looking for offers around $1000

Check it out on

http://www.quaife.co.uk/catalogue/page41.htm

(and page 42 for heavy duty drive shafts)

Call me on 0427 464748

Dave
Posts: 30
Joined: Sun Jan 23, 2005 3:50 pm
Location: Mt.Evelyn, Melbourne.

disco diff lock

Post by natanchris »

dave, sounds tempting, but i think i'd prefer a full locker in the rear....i'm familiar with the ARB from mates cars, i was just concerned whether my stock axles would be up to it or not. (can anyone tell me whether my axles are the better ones or the weak ones???)
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

yep its vacume activated, i think i payed $2000 for my defender rear(sals. diff) installed. including MD drive flanges
serg
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

McNamara do an air locker for the Rover. I've got one in the front and have been very impressed. I think a rear setup would be similar in price to an ARB considering you already have the air compressor.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

If you already have a compressor I would gowith the JacMac air locker.
MIchael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 379
Joined: Sat Aug 21, 2004 2:40 pm
Location: Epping , Vic

Post by BASSYK »

i can recommend the MAXI DRIVE however the Jac Mac may work out cheaper if you have already got the compressor

to get it fitted try HARDCORE 4x4 in mitcham , Dave does an awesome job and is very helpful for those od us that dont have a huge budget

Hardcore 4x4 Mitcham 4 Mcglone St 3132 (03) 9872 3011
Gu TD42t

[url]http://www.3rdrock4x4.com[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests