Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
torquer camshafts G13's
torquer camshafts G13's
I need to change my cam, as the Barina/Swift has wrong cam , cant work my Sierra dizzy with it, bummer. I have my old G13A camshaft, but its not looking too good, scratches and pitting, etc. It has been suggested, by some, that now is good time to fit a more torquey camshaft. 4 questions 1: are all the G13 cams interchangeable(ie only the dizzy drive differs)? 2: where, what and how much are better cams? 3 if cam is upgraded, do you need to change rocker arms etc? 4 is it better to get a standard, new or 2nd hand, camshaft?? christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
overkill wrote:I would suggest using a new cam and you shouldn't have to modifie anything to run it. I think the cams are different in some models as I run a swift 13a engine but didn't have to change the cam to run the right angle disi.
maybe its because its a tbi version? it has no gear on the end, just a keyway thing. my g13a has a gear on the end. thanks bud, christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Who is online
Users browsing this forum: No registered users and 1 guest