Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
16" GU rims onto GQ ??
16" GU rims onto GQ ??
Gday guys and gals
Tried the search but couldn't find a straight answer.....
Need some 16" rims for new JT's I bought. Question is whether standard GU steel 16x8 rims will fit onto 93 GQ.
Also is 16 X 8 a good size for 34x11.5x16 JT's
Currently running 32x11.5x15's (which I'll keep for day-to-day stuff)
Thanks
Dazza
Tried the search but couldn't find a straight answer.....
Need some 16" rims for new JT's I bought. Question is whether standard GU steel 16x8 rims will fit onto 93 GQ.
Also is 16 X 8 a good size for 34x11.5x16 JT's
Currently running 32x11.5x15's (which I'll keep for day-to-day stuff)
Thanks
Dazza
93 diesel mav. Basic truck at the moment but plans are brewing.... 4" spring, OME shocks, adj panhard, castor bushes, usual other. Wanting 9000lb winch, cargo barrier.
Re: 16" GU rims onto GQ ??
dazz mav wrote:Gday guys and gals
Tried the search but couldn't find a straight answer.....
Need some 16" rims for new JT's I bought. Question is whether standard GU steel 16x8 rims will fit onto 93 GQ.
Also is 16 X 8 a good size for 34x11.5x16 JT's
Currently running 32x11.5x15's (which I'll keep for day-to-day stuff)
yes they will fit.
yes 8's are good size for 11/5's.
Road Ranger
A speed camera would have prevented that!
GU rims on GQ
I have these rims on my GQ and they are a good looking rim. Be careful when sourcing these as the early ones tended to crack and were replaced under warranty by the dealers.
Dealers were chucking them out or giving them away to guys who needed trailer rims ??
RoadNazi
Dealers were chucking them out or giving them away to guys who needed trailer rims ??
RoadNazi
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville
Contact:
I was getting quotes of like $150-200 per rim from wreckers (due to the known cracking problem they're hard to get good ones). SO I bought new Sunraysias in 16x8 for about $90 each (still way more than 15x8"s).
Toyota 80/100 series might be easeir to find - dunno how they go for caliper clearance though toyota are usually alright for clearance - anyone got any answers on this?
Toyota 80/100 series might be easeir to find - dunno how they go for caliper clearance though toyota are usually alright for clearance - anyone got any answers on this?
Beastmavster wrote:I was getting quotes of like $150-200 per rim from wreckers (due to the known cracking problem they're hard to get good ones). SO I bought new Sunraysias in 16x8 for about $90 each (still way more than 15x8"s).
Toyota 80/100 series might be easeir to find - dunno how they go for caliper clearance though toyota are usually alright for clearance - anyone got any answers on this?
Toyota rims are too small in the centre hole by 2mm, plus 100 series are 5 stud.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Thanks for the replys. Seem to be plenty of sets (5) asking around $500-. JT's should sit nicely on them ('specially with new 4" lift). I'll post some pics when it's all together.
93 diesel mav. Basic truck at the moment but plans are brewing.... 4" spring, OME shocks, adj panhard, castor bushes, usual other. Wanting 9000lb winch, cargo barrier.
Who is online
Users browsing this forum: No registered users and 1 guest