Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transfer ratios

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 498
Joined: Tue May 04, 2004 7:48 pm
Location: sydney

transfer ratios

Post by HUNTERLUX »

r all hilux transfer ratios the same from 84 -95
cause i just changed mine & now the speedo is out 20%
& i was always told they were the same
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Post by batcho101 »

i have heard that the ratio is the same but the cog that runs the speedo is different therefore putting your speedo out
might be wrong though
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Posts: 498
Joined: Tue May 04, 2004 7:48 pm
Location: sydney

Post by HUNTERLUX »

i put my original cog back in wickh made it go from 15-20% out
the transfer came with 17 tooth cog i put in an 18
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Post by batcho101 »

did u try with the 17 tooth one ?
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Posts: 498
Joined: Tue May 04, 2004 7:48 pm
Location: sydney

Post by HUNTERLUX »

yes it was 15% out & the 18 tooth was 20%
so in theory i need a 15 tooth
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

if you say so sounds like a plan :D :D :D
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Posts: 498
Joined: Tue May 04, 2004 7:48 pm
Location: sydney

Post by HUNTERLUX »

but do they make them is the question
Post Reply

Who is online

Users browsing this forum: No registered users and 44 guests