Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

welding 2mm box steel with 130 amp ARC

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 257
Joined: Thu Nov 27, 2003 10:22 pm
Location: Stanthorpe- QLD

welding 2mm box steel with 130 amp ARC

Post by Snarba »

will this be enough oomf or will I need something bigger?
I've got a WEAPON OF MOSS DETRUCTION
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

im no expert but i reckon it should be enough
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

seperate the joins my 1 mm or a touch more to allow full penetration. test on a scrap first.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

bru21 wrote:seperate the joins my 1 mm or a touch more to allow full penetration. test on a scrap first.

cheers bru


OR.......

Tack it up and then run the grinder through each join so that the join is in a "V" shape. this is called a "V buttweld" and allows for full penetration.

130 amp and 2.5 rods will be fine.

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 141
Joined: Fri Nov 12, 2004 4:46 pm
Location: Newcastle

Post by mickbeny »

Hi all...If the wall thickness is only 2mm,I would say 130 amps is way to high for a 2.5 electrode.You need to be around a 100 amps or less,depending on the weld position.Dont bevel butt joints or have a gap,if your amps are set rite you will get good penetration,if you bevel butt or put gap you will blow a hole and mess the weld up.
PEACE...
Top
Posts: 257
Joined: Thu Nov 27, 2003 10:22 pm
Location: Stanthorpe- QLD

Post by Snarba »

thanks everyone... off to weld stuff!!
I've got a WEAPON OF MOSS DETRUCTION
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests