Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mods for getting more articulation on an IFS hilux ?
Moderators: toaddog, Elmo, DUDELUX
Mods for getting more articulation on an IFS hilux ?
Hey there all
Does anyone have any mods for getting more articulation on an IFS hilux,
I have changed torsion bars, modified bumpstops and put spacers on my shocks
Cheers
Heath
Does anyone have any mods for getting more articulation on an IFS hilux,
I have changed torsion bars, modified bumpstops and put spacers on my shocks
Cheers
Heath
Been through this.
As far as I am concerned you can not get an huge increase in articulation
without distroying CV .
Have tried ball joint spacers ,low profile bump stops and lowering the diff
to get better CV angles.
I have found that the best off road setup is:
Standard Torsion Bars and fit a locker in the front.
Fitting a locker will also help save you from busting the front diff.
For the rear you can change the shock mount position,not the 1 front ,1back set up.
Soft 2 inch lift rear springs.
Keep the factory rubber in the springs and shocks as I found nylon bushes
don't flex as well.
If you want articulation go and see CHEEZY.
At the end of the day SAS.
Rgds
Dazza
As far as I am concerned you can not get an huge increase in articulation
without distroying CV .
Have tried ball joint spacers ,low profile bump stops and lowering the diff
to get better CV angles.
I have found that the best off road setup is:
Standard Torsion Bars and fit a locker in the front.
Fitting a locker will also help save you from busting the front diff.
For the rear you can change the shock mount position,not the 1 front ,1back set up.
Soft 2 inch lift rear springs.
Keep the factory rubber in the springs and shocks as I found nylon bushes
don't flex as well.
If you want articulation go and see CHEEZY.
At the end of the day SAS.
Rgds
Dazza
Re: Mods for getting more articulation on an IFS hilux ?
beefa125 wrote:Does anyone have any mods for getting more articulation on an IFS hilux,
SAS
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
IFS
remove your sway bar - mate took his out and it helped out a lot..
Re: sas
dreama wrote:sas its the only way
beefa125 wrote:If I were to go an SAS coversion, what sort of coint would I be looking at ?
5-6 thousand, more , less ??
Cheers
Depends were you get it done and what you get done and what you have already got for parts.
I supplied the diff (complete),extra passenger steering arm and leaves and it cost 2K that included IFS hub kit
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Who is online
Users browsing this forum: No registered users and 13 guests