Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rockhopper V's Marks

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Rockhopper V's Marks

Post by Fathillbilly »

do any of you guys know the differance between the two T/F case gears, besides ratios

ie. do the rockhopper have a back lash eliminator?
are either straight cut gears on the low range set?

or any other info

cheers
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

What sort of vehicle are we talking here?
Top
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

TD42 GQ Patrol
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

mine is very quiet :)
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

can you see any differance between the profiles of the gear teeth,

i cant make it out through the plastic :)
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

big red wrote:mine is very quiet :)


that is because they are in my car. I have a pretty recognizable coffee table :finger:

They whine a little more than the standard gears, but not enough to be noticeable unless you are listening for it.
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

The input gear in the above pic does not look to have a backlash eliminator fitted but I think the Nissans have them fitted on the idler gear so there is constant tension between the input to idler and idler to low gear cogs. I know all GU sets from Marks from now on will come with them standard.
Either brands will not be straight cut as the noise would be unbearable.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

My rockhoppers are around 3 years old now and they whine LOTS when in 3rd or higher (in low range only of cousre). They have been the same since the 1st day I put them in.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

Guts wrote:My rockhoppers are around 3 years old now and they whine LOTS when in 3rd or higher (in low range only of cousre). They have been the same since the 1st day I put them in.


My hilux ones were the same, I think they must be straight cut. I bought an exchange case already built so I never saw the actual gearset. But they were real noisy.

These GQ ones are maybe a tiny bit noisier than stock gears, not even noticeable. The ones in the pic are the new ones with the backlash eliminator.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests