Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diesel hard to start

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Diesel hard to start

Post by pegasus »

Hi all

I am having trouble starting my car in the mornings, or when it has been left for long periods of time (like more then 7 or so hours).

It turns over fine, but a lot of times before it fires. I can then turn it on and off as I please. I turn it over in periods of maybe 15 or so cranks, and I have to do this 4 or 5 times before it fires. Each time with a small break in between.

I am thinking either glow plugs or fuel pressure being lost.

Its a 2.4 litre (2L) motor from my 4Runner.

What do you think?

Stew
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

glow plugs
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

glow plugs
TECH SCREW GURU
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

glow plugs



:wink:
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

just to confirm that...

GLOW PLUGS if you missed the first 3 answers :shock:
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I like this topic as its an engine question that even I knew :lol: and to top it off I was first to reply :finger:
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Glow Plug


















































Timer :roll: :roll:
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

ok, Lets see if I have gotten this correct,

Its the GLOW PLUGS right??

:P :P :P :P
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

GLOW PLUGS!

Is that what female GLOW WORMS use when its that time of the month :lol: :lol: :lol:

(sorry of topic but i thought it was funny)
Posts: 568
Joined: Fri Nov 01, 2002 10:11 pm
Location: cranebrook, NSW

Post by Ryan »

im gunna say it has something to do with fuel pressure being lost like you first suggested................ just to be different :finger:
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Battery :?:
Last edited by RoldIT on Mon Apr 28, 2003 11:28 pm, edited 1 time in total.
KRiS
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Woops ... I meant glow plugs. :finger:
KRiS
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Its probably the ambient temperature within the combustion chambers not being compatable with the regulated air/fuel charge being ingested into aforementioned combustion chambers. Common symptoms of this condition are - It turns over fine, but a lot of times before it fires. I can then turn it on and off as I please. I turn it over in periods of maybe 15 or so cranks, and I have to do this 4 or 5 times before it fires. Each time with a small break in between. Try-



























NEW GLOW PLUGS
Mud makes excellent toothpaste.
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

BundyRumandCoke wrote:Its probably the ambient temperature within the combustion chambers not being compatable with the regulated air/fuel charge being ingested into aforementioned combustion chambers. Common symptoms of this condition are - It turns over fine, but a lot of times before it fires. I can then turn it on and off as I please. I turn it over in periods of maybe 15 or so cranks, and I have to do this 4 or 5 times before it fires. Each time with a small break in between. Try-



























NEW GLOW PLUGS


:rofl:
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Blinker Fluid?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

ToNkA wrote:Blinker Fluid?


tonka, have you got any spare blinker fluid? i may need some :finger:
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

Are you sure its not a fuel pressure problem?
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

pegasus wrote:Are you sure its not a fuel pressure problem?


As others have said ... most likely GLOW PLUGS

It could possibly be a problem with the injectors (i.e. - stuffed nozzles/bad spray pattern/popoff pressures) but this would be noticeable by bad/rough running when cold and maybe at other times, and probably excessive smoking.

If the injector pump wasn't delivering enough pressure then it would be down on power, not just be hard to start.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 145
Joined: Fri Jan 10, 2003 8:34 pm
Location: Ringwood, Melbourne

Post by Maddog »

Wrong key?
Always late in a 2.8
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

I did check the key, it did seem ok, but then again, its a Toyota, 1 key fits all..........

I think I may have left the wipers on, yes, I think I left the wipers on, that would answer a few things.............. :P
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

to test glow plugs - a diesel mechanic mate of my old mans (rebuilt my 2L) showed me a trick

pull out the glow plug - get a length of wire and connect that to the glow plug and the positive on the battery - place a small amount of oil on the other end of the glow plug and then earth it on the negative terminal - the oil will smoke almost instantaneously (sp?)
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Just as easy it to use a multimeter and check the resistance of the plug, it should be 0.
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

ok, thanks Bubs, I will try that.

Probably get new glow plugs anyway, they are cheap, I have no idea if they have ever been replaced before.
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Could be a couple of things first run a cable of very large diameter from your positive terminal to the aluminimum strip that runs across the top of your glow plugs useing welding gloves hold it conected for about a count of 20 then try to start the car if it starts its bad conections to your glow plugs pull all the conections apart and put some ZINC OXIDE GREASE on all the conections its what the auto sparks use


If it still dosent want to start check the resistance of your glow plugs if there originals probable replace them there not that expensive just make sure you get the right voltage ones for your car as 60 series ones have 3 different voltages depending on the year




Lastly you didnt say if once you get it started it can be started easily for the next couple of times if so on top of your injector pump are valves that hold the fuel in the injector lines at high presure if they are leaking then it takes time at start up to build up enough pressure to start the car it will run at first like a petrol with a miss fire untill all the air is bled from the system

Just some info from a back yard mechanic whos had these sorts of problem before would suggest you get the greas and pull every connection apart on your car and re grease will save you alot of money in the long run if your playing in mud and corosive enviroment
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

Duncan

Thanks heaps for your reply.

I will probably replace the plugs anyway, I have no idea of their history. After it starts, it runs fine (cold but), and can be turned on and off as I please and it is fine.

Stew
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

robbie wrote:
ToNkA wrote:Blinker Fluid?


tonka, have you got any spare blinker fluid? i may need some :finger:


Have rang Toyota spares about blinker fluid... It's on backorder for about 6-8 weeks. Seems that the blinker fluid factory (only one in Japan) has cut production due to a shortage of raw material.......

:rofl: Blinker fluid.....
Posts: 12
Joined: Mon Feb 24, 2003 8:04 pm
Location: central coast NSW

Post by tojo86 »

possably glow plug relays-timer. to check glow plugs use ohm-meterto see if there is continuity between plug and earth. continuity good-no cont throw plug into nearest ocean :lol:
how many pickles in a pound of pickled pork?
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

it is none of the above, it needs to spend a day in the booty fab offroad workshop. My spent the day there yesterday, before it struggled to turn 35's, 5.29 gears, no it is wheel spinning into 3rd and slipping the clutch throught 1 and 2. Time for a brass plate.


NICK
TECH SCREW GURU
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

:lol: :lol: :twisted:
Post Reply

Who is online

Users browsing this forum: No registered users and 116 guests