Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front diff in rear?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 70
Joined: Sun Aug 08, 2004 2:51 pm
Location: Melbourne

front diff in rear?

Post by alrob »

i went to the wreckers the other day to get another diff to replace the bufggered one in my 4runner. What he gave me was a 4.5 diff, but a front diff. his reasoning was that it had done less work.

then a guy at work who knows his shit on cars, said thats crap, and that the meshing of the gears will be all wrong.

so, can a front diff go into a rear? i'm talking solid axle here too...
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

Yep sure can.
Both are interchangable.
The front diff centre is really a rear working on the wrong side of the gears when its setup in front.
So it will work fine in the back!
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Technically he is kind of right , when ive set up diff gears i always set the gear contact pattern for the normal direction of rotation, but what the wrecker said i justafiable. I have specifically brought s/hand front diffs for that reason and run them in the back with no prob's so far.

Wally
Top
Posts: 70
Joined: Sun Aug 08, 2004 2:51 pm
Location: Melbourne

Post by alrob »

cool. so even though the pinion is turning the crown wheel on the underside of the teeth, it will still run/sound/wear as normal?
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

alrob wrote:cool. so even though the pinion is turning the crown wheel on the underside of the teeth, it will still run/sound/wear as normal?

When in the front it is doing this.

When in the back its running on the correct side of teeth.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 70
Joined: Sun Aug 08, 2004 2:51 pm
Location: Melbourne

Post by alrob »

great! it makes sense now! thanks for you help guys. and i thought i'd haveto wait for a day or two for a reply!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest