I have a TD42T with a Go Fats Bits boost control valve set at 12.5 PSI (fitted for 2 weeks). When we went camping over the weekend towing a 1500kg camper, there was a pssshhht sound when giving it a bootful up a hill. There was no loss of boost (according to the guage) or power so I haven't done a turbo hose. It is not evident when driving normally either with the camper or a bootful without.
Any ideas?
Regards
David
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TD42T and a PSSSHHHT sound under load
It is the boost spiking up to 13psi and then factory setup over boost protection valve (round valve in side of chamber) dumps excess boost and will not let it go over 13psi. I had same thing running a GFB controller. They are shit in my opinion and allow the system to spike. I backed the boost back to 10psi and ocasionally it would still do it.
I fitted a turbosmart controller and have not had a drama since.
I fitted a turbosmart controller and have not had a drama since.
Last edited by BIG GQ on Mon Apr 25, 2005 6:19 pm, edited 1 time in total.
Cheers
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
BIG GQ wrote:It is the boost spiking up to 13psi and then factory setup over boost protection valve (round valve in side of chamber) dumps excess boost and will not let it go over 13psi. I had same thing running a GFB controller. They are shit in my opinion and allow the system to spike. I backed the boost back to 10psi and ocasionally it would still do it.
I fitted a turbosmart controller and have not had a drama since.
Thanks Linc. That would explain everything and is a relief it is not something that has gone wrong.
Regards
David
Who is online
Users browsing this forum: No registered users and 32 guests