Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How High is your Mq /Mk ???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

How High is your Mq /Mk ???

Post by Big Red Toy »

After purchasing some axles last week & looking at a couple of other mq/mk's i though shit mine must be tall!
We decided we would measure from the ground to the top of the grill / below bonnet line

So i went home & measured & Mine measured 122cm :D
EDIT: Thats With 3" body 2" springs & 36'swhats everyone's else's??


The other two measured:
Scrapper's : 97cm & 102cm
Image


Poser Shots: :D
Image
Image
Image
Image
:armsup: :armsup: :armsup: :armsup: :armsup: :armsup: :armsup:
Last edited by Big Red Toy on Thu Apr 07, 2005 6:50 pm, edited 2 times in total.
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

i measured mine up its 121cm :armsup:
okay mods
sd33 diesel
2 inch springs
2 inch extended shackles
2 inch body
and 33s



btw nice pic mark :armsup:
Last edited by GOT MUD on Sun Apr 03, 2005 6:34 pm, edited 2 times in total.
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Mine messured in at 125cm. You also should put a list of mode in so you can compare with trucks simular to yours.

Mine- Sping over
35" claws
2" springs
L28 motor
You do not have the required permissions to view the files attached to this post.
Its not cool, unless it's got boost :)
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Ill measure mine when the new springs go in, cause the current fronts are shagged and 'W' shaped :D

nice pic mark :armsup:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

Screwy_ScrewBall wrote:Ill measure mine when the new springs go in, cause the current fronts are shagged and 'W' shaped :D

nice pic mark :armsup:


just measure it already.............
Posts: 103
Joined: Tue Aug 17, 2004 5:26 pm
Location: Slovenija (EU)

Post by buger »

Mine messured in at 122 cm, with front springs shagged, SOA and 36" tyres. :cool:
You do not have the required permissions to view the files attached to this post.
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

137.5cm

SOA'd, on 35" BFG's...... with excelent spring paks :finger:

Really the Question should be how much clearance from the chassis to the ground !!!!

I measured mine at 62cm from the gearbox mount area on the bottom edge of the chassis to the ground.

66cm with the 38.5" Swampers on :armsup:

praise the lifted and pass me another height/dizzy pill


just as well I dont drink ....I'd hate to fall out of mine pi$$ed :drinking:
You do not have the required permissions to view the files attached to this post.
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

i thought more people would be posting up heights
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

I would I just keep forgetting to measure it.

Standard sagged springs - I will measure the other one as well that I am picking up later this week (hopefully).
Posts: 296
Joined: Fri Oct 01, 2004 1:50 pm
Location: Sutherland Shire - Southern Sydney Suburbs

?

Post by Patroldude »

Ah - I will have to measure mine when the SOA is done - got whole truck with ORI SOA done to it with V8 conversion and few other choice bits for $1,000. took us 3 hours to strip it completely down to nothing (love it when no bolts are seized) Guy I got it off recons it had 2 inch lifted packs but he took out heaps of springs - just hope I don't end up like screwy with springs that look like and ocean view they got that many waves in em! ;) I have to fix up my front shackles too - idiot before me moved em back but did a really bad job of it!! Oh n he welded the bull bar to the chassis rails too - arse clown!

All these rigs I must admit look so damn nice - I recon a big congratulations to all those who posted pics etc - looks great peoples - give me in spiration galore....

Mk
MQ/MK Parts for sale!!!! See for sale section!
Posts: 47
Joined: Wed Apr 14, 2004 11:07 pm
Location: Barden Ridge (Menai), NSW

Post by mud13s »

106CM :finger:

Its as I brought it so dunno whats been done except for whats been replaced when I've broken it

Lower than 106 normally as the bullbar and guard are off they got bent when I was playing

Paul
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

tall

Post by DR Frankenstine »

130mm

2" body, 2" springs + SPOA, 35" pro-comps, STD shackles.
Before and after
You do not have the required permissions to view the files attached to this post.
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

after seeing kingys, marks and urs Peter, gotta measure mine, will put the new front end springs together this weekend hopefully and will measure then.... wanna see how they compare :armsup:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Got my new springs today and sitting at ride hieght.

She measures in at 128cm :D

Thats:

- 38" super swampers
- Spring over axle
- V8
- reverse shackle front end, dropped crossmember
- 2 inch extended shackles
- 1 inch body lift ( only to clear the zorst )


screwy :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
msh
Posts: 66
Joined: Sat Mar 05, 2005 12:08 am
Location: Melbourne

Post by msh »

Probably shouldnt admit this but mines 100 exact :cry:
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

Mine's sitting at 105cm.

Its got Ironman springs, 2" Extended Superior shackles, and 31" BF All Terrains.

Coxy
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

I made a mistake......

Now that ive got the new bushes all in and the tyres pumped up she is sitting at

131cms to the bottom of the bonnet :roll:

all mods as above
:armsup:
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

No idea,

Screwy do you remember before you stripped it?

2" suspension
2" body
2" shackle
35's... it must add up to something
You do not have the required permissions to view the files attached to this post.
Posts: 129
Joined: Fri Jun 04, 2004 4:26 am
Location: Albury, NSW Australia

Post by Team Carpet RC Vehicles »

Ok I thought I'd better measure mine too :P

It measured 110cms

- 2" Body Blocks
- 2" Suspension (Tired)
33" BFG MTR's
SD33T + Lots of lights :cool:

I want ext shackles.. can anyone help??
You do not have the required permissions to view the files attached to this post.
Posts: 206
Joined: Thu Sep 02, 2004 4:32 am
Location: Jamaica/(Haiti)

Post by Lawrence »

Mine is about 38 inches with 31 10.5 tires. new springs but figure something, wrong with springs as other mks sit couple inches higher. Friends 91 gq ute measures about 43 inces with no modification, except 285 75 16s. Figure that gqs and mqs sit at same height. (Actually Mq height specs are slightly more, although any that are still standard would have sagged long ago and have new lift springs).
89 gq dx. bone stock --- for now.
Posts: 147
Joined: Wed Aug 18, 2004 10:25 pm
Location: Forest lake QLD

Post by kc_ksom »

Mine is

2in body lift
2in springs
31x10.5
113cm

Should be interesting tomorrow when the 35's go on.

Casey
Posts: 147
Joined: Wed Aug 18, 2004 10:25 pm
Location: Forest lake QLD

Post by kc_ksom »

Howdy

Mine is now 119 and a bit on 35's
Heres a pic

Casey
You do not have the required permissions to view the files attached to this post.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

How are you going for clearance there kc_ksom? Have you taken it out for a run yet? Just curious, I'm still toying with tyre choice.

Coxy
Posts: 147
Joined: Wed Aug 18, 2004 10:25 pm
Location: Forest lake QLD

Post by kc_ksom »

yea Coxy

There pretty close, the tyre does hit the spring on absolute full lock, and there isnt that much clearance in the gaurds as yet as I still have to cut the gaurds.
But as a tyre the Baja claw radial is pretty awesome, I havnt noticed any difference in noise etc, I think its even lighter in the steering than with the 31's on it, thats no joke.

The tyres do vibrate at around 5km, wich feels pretty different, like the tail shaft is out of round, lol...

I just hope the coppers stay away.

Casey
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

MQ080 wrote:No idea,

Screwy do you remember before you stripped it?

2" suspension
2" body
2" shackle
35's... it must add up to something


Id be guessing about 115cm approx ;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Post Reply

Who is online

Users browsing this forum: No registered users and 141 guests