Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to buy winch rope in the USA

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Where to buy winch rope in the USA

Post by MKPatrolGuy »

My mate is in the US at the moment and has just emailed me to find out where he can go and get some winch rope from while he is there?

Somewhere between LA and San Francisco in California, Where he can just walk in off the street.

Thanks
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

any industrial lifting place should be able to sort out a dyneema / plasma type rope suitable for winching, but would not think the price would be that much better as we have manafacturers in this part of the world that do pretty good prices.

what size is he after?
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Tiny wrote:any industrial lifting place should be able to sort out a dyneema / plasma type rope suitable for winching, but would not think the price would be that much better as we have manafacturers in this part of the world that do pretty good prices.

what size is he after?


Kewl, we are after 3/8" or 9.5mm, give or take. Want to put 50 odd metres on the high mount and from what I have read 5/16" isn't rated high enough for the CCDA events.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

jum onto Pirate and ask over there. There are quite a few dealers on there so they should be able to help you. After you get flamed for being a newbie that is
Ransom note = demand + collage
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

MKPatrolGuy wrote:
Tiny wrote:any industrial lifting place should be able to sort out a dyneema / plasma type rope suitable for winching, but would not think the price would be that much better as we have manafacturers in this part of the world that do pretty good prices.

what size is he after?


Kewl, we are after 3/8" or 9.5mm, give or take. Want to put 50 odd metres on the high mount and from what I have read 5/16" isn't rated high enough for the CCDA events.


no wories, can supply 8mm or 10mm single or double braid, assume you want the single braid (stronger) let me know and I will get you a price
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests