Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hi-steer Ackerman Angle

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Hi-steer Ackerman Angle

Post by beebee »

Of the guys out there running hi-steer, what is the ackerman angle like? Hom much different it is to the standard setup (to the eye)? Do you notice that you suffer from any front wheel skidding more than the original setup?
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Be aware that the Ackerman speed is quite low, when the rear tyres travel on a smaller radius than the front. As speed increases to about 40 km/hr the rear tyres will travel on the same radius as the front.

So any before and after comparisons of Ackerman steering are only valid at low speed.

It is generally not practical to achieve true Ackerman steering when the tie-rod is located in front of the axle (the location of the tie-rod ends would foul the wheels).
John
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests