Any assistance would be appreciated.
Since last year, I have had a problem with my early F75 non vacume transfer case jamming in neutral. It happens when I am in 4H. I can drive sometimes a few metres, sometimes quite a long distance, but eventually, the shift jumps and jams into neutral. Only way to fix it is to remove the entire shifter and its mount from the top of the case, push the selector rod back with a screwdriver, and reassemble. I have had the case apart about 4 times since xmas, and with reference to a F75 workshop manual, made sure the thing was correctly put back together. I first thought a weak or missing indent spring or ball but all is fine. I now suspect it may be wear on the selector rod and lever end? but nothing is really noticable. I drive now in either 2H or 4L with absolutely no problems since 2H with diff lock takes me most places anyhow.
Any ideas???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer Case problems
Moderator: Tiny
Transfer Case problems
Mud makes excellent toothpaste.
Who is online
Users browsing this forum: No registered users and 16 guests