http://www.zukiworld.com/cgi/yabb/YaBB. ... 1114707300
just wish it could be like that over here.
some of the guys have full custom, strengthened and widened front ends, which are mostly still IFS! some have the SAS conversion, but they are just as good to look at.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vitara's go HARD........in the states.
Vitara's go HARD........in the states.
1995 Vitara:
stock standard
WWW.DARWIN4X4.NET
stock standard
WWW.DARWIN4X4.NET
zukin4life wrote:yer ive seen on a uk site some vit's have a chassis lift???
is that were they lower the hole front suspension down off the chassis
i know exactly what you are talking about! thats number one on my dreams list, i just wish i could get one done where i am.
its Leigh's custom 8" BL, and how he describes it, a lot of cutting and welding. i dont have exact details, as its almost a top secret thing, but it also includes an engine lift too, so its back to standard height in the engine bay.
they are running 35"x15.5" swampers, mmmmmm, *drool*
here is the site: www.raging-rhinos.co.uk
check out the pics section, there are a few with the 8" chassis lift.
1995 Vitara:
stock standard
WWW.DARWIN4X4.NET
stock standard
WWW.DARWIN4X4.NET
fasdfsd
zukin4life wrote:yer i seen a member section of a site with a few vits like that ill see if i can find the link
EDIT: i spoke to soon sikid just posted it lol
so all it really does is allow you to run longer springs and give more travel or have i got it wrong
NOPE.
its a BL, and thats all it is. all suspension geometry front and back is still factory specs. (EDIT: or unless yopu have lifted coils or a calmini kit installed)
so nothing changes. if you look at a vit with a 3" BL, you will clearly see the chassis rail underneath. this is what it eliminates. the 2 chassis rails that vit owners use as secondary, or should i say, primary rock sliders.
so in essence, its like a lifted hilux with no BL. no chassis rails to get in the way, or hinder ramp over angle, and its not like the SWB vits suffer anyway.
1995 Vitara:
stock standard
WWW.DARWIN4X4.NET
stock standard
WWW.DARWIN4X4.NET
Who is online
Users browsing this forum: No registered users and 4 guests