does anyone know about how to adjust the drivers side quarter window on a 2 door? is there a bolt that comes up from underneath? i cant open the window without it falling out!!!! i think the bolt thing is pretty rusted so if i have to i would like to be able to remove the whole frame and weld something in there . can the frame be removed?
thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
drivers door quarter window
Moderator: Micka
You will need to remove the whole window frame, the 1/4 vent is held in position at the bottom with a long bolt with a spring and nut. these usually rust out and good ones are hard to find. You may be able to fab up a repair or make them fixed.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Look down either side of the door and you will see bolts that once removed, the whole frame will just lift out. you will need to remove the rubber seal from around the top of the door - do this carefully as they are easy to tear.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Who is online
Users browsing this forum: No registered users and 4 guests