Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suspension help....Jackaroo

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Suspension help....Jackaroo

Post by HRZOOK »

Hi All

I am asking this for a mate who owns a 91 Jackaroo

He is looking at getting more suspension performance out of his rig

His setup is Leaves back and IFS

I made a few suggestons like

Lux diffs front rear
4 link the rear like the newer models
and hopefully the front but unsure if this would work

Has anybody done any of these mods?
Is there any better ways to get diff under the front?

Or am I way off and there is a much easier and cheaper way to get this rig to flex

Thanks in advanced
HR
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

The later rear coil suspended Jacks are a 3 link trailing arm and panhard. They flex very well in the rear for what they are. The front would be better with SAS though.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Post by HRZOOK »

OK so what diffs do people use for the SAS conversion ??
Posts: 155
Joined: Sat Apr 09, 2005 3:19 pm
Location: north england

Post by dr who? »

when i get home im gonna do a sas conversion on my rig, its a 96 swb 3.1 and was thinkin about putting gu diffs under it, but it will have to wait for a few more months yet before i get home!!
but it should be a monster, but doing that will put off the zook project for a while, hmm im still unsure which to do first :?
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

HRZOOK wrote:OK so what diffs do people use for the SAS conversion ??


Usually a yota diff as they have 4.56:1 and 4.3:1 ratios to match most Isuzus.
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests