Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox Problem? Or weong technique

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Gearbox Problem? Or weong technique

Post by gogo »

Recently I installed a 5speed bos to replace the old 4 speed. The speed box uses a vacuum switch to engage the 4WD, thus the 4W stick only has 2H and 4L.

After a few days offroad I could not switch into 2H. Only way to do it was to go forward, reverse, turn on turnoff 4WD....and eventually it went into 2H.

Is this normal or what? Or maybe I have the wrong technique.
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

Sounds like you had 'windup', caused by driving in 4wd on hard (non slip)surfaces.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Hi Sixty,

Yes that could have been the case. However, I usually disengage the 4WD on those type of surfaces....maybe I did not do on 1 or occasions!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests