What gearbox will bolt onto the 1KZ engine.
A friend of mine was thinking about replacing his 2LT engine, in his LJ73 Cruiser, with a 1KZ engine for some more power.
It's still at the thinking stage, we have also talked about a 3B engine or a ???. Open for suggestions.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1KZ Engine and gearbox.
Moderators: toaddog, Elmo, DUDELUX
1KZ Engine and gearbox.
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
The 2LT in the Bundera ran a R151 (R15something anyhow) box, so if the 73 is the same then I'm fairly sure that this is the same gearbox used in the 1KZ Surfs- but with a different bell. All you havwe to do is source the bell to suit the 1KZ (there should be a few around going off all the old 3L Surfs gettin around) and it will bolt directly onto your existing box.
Who is online
Users browsing this forum: No registered users and 3 guests