Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

stock spring bushings?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

stock spring bushings?

Post by bad_religion_au »

has anyone heard of spring bushings for a 40 that have a steel tube with thinner rubber between the tube and the shakle mounting plate or spring...

trying to work out some wandering habits on the front axle of the 40, someone suggested the above could be part of the problem (i'm chewing out poly bushing in the solid mount end of my front springs every couple of weeks.)
Spit my last breath
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

maybe give the ome bushes a try they cop a fair amount of punishment

are u greasing up the bushes?

are they the right size since the early to late models are runnin different sized pins n spring eyes?

have you got greaseble shackles they would help
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

yep, greasable shackles and spring pins, correct size bushings (the earlier smaller size) and i'm greasing them on assembly... and they chew out within a week or so...

might get some ome ones, someone suggested playing with my toe out settings.... might give that a twirl and see if i can't nail this puppy
Spit my last breath
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests