Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

V6 Pajero on LPG

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 2
Joined: Sun May 04, 2003 9:22 pm

V6 Pajero on LPG

Post by Anezka »

Hi all,

I'm just wondering if anyone out there has a 91 V6 3.0i NG Pajero running on LPG. I hear that it is not recommended by Mitsubishi but with the fuel prices at over a dollar a litre and the Pajero getting 17L per 100kms in economy, I am thinking of going LPG. I have requested information from Gas Research Australia regarding their Direct LPG Injection system but I still am wondering if the heads will cope with the gas. I've heard stories of valves burning out at 40,000kms and heads needing new seats every 100,000kms. I've only seen ONE V6 Pajero (NG) on gas so far out of about 50 or so that I've seen around. This also leads me to beleive that LPG may not be too good for them. Are these myths? Can anyone offer some good advice?

Thanks in advance,
Anezka.
91 3.0 V6 Auto Superwagon - bog stock ;)
Top
Posts: 232
Joined: Mon Nov 04, 2002 12:12 am
Location: perth western australia

Contact:
Contact dinos4x4

Post by dinos4x4 »

i also looked into converting my paj to gas but the gas fitters said that mitsubishi dont recommend it because the heads are not compatable to run lpg .
they said you can run a upper cylinder lube kit , but even the gas fitters dont recommend it.
Top
Posts: 397
Joined: Fri Jan 03, 2003 6:21 am
Location: USA

Post by DougH »

What is the problem with the lpg???
DougH
95SR: locked front and rear, more coming soon.
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

The problem is that an lpg motor runs a lot hotter cooking valves if they are not up to it.
Mitsi didn't factory warranty lpg kits until 1997 or so when they changed the valve material to cope with the extra heat. It took them a few goes at it mind you.
So my advice to you is do not do it even with an upper cylinder head lubrication kit. The 3.0 V6 will chew out valves quite fast.
2 vehicles that are notorious for this are V6 4 Runners and 3.0 V6 Paj's.
Top
Posts: 39
Joined: Wed Jan 15, 2003 6:48 pm
Location: Sth Gippy

Post by Neilj »

Yea, my 253 HQ gets the same MPG as the Pajero. Three LPG conversion places told me it would be false economy to go to gas. So I didn't.
Having said that, your fuel consumtion sounds really crap!
I get 19.5 MPG, (trip) you work out the metric conversion :D
It's time for my pill!
Top
Posts: 397
Joined: Fri Jan 03, 2003 6:21 am
Location: USA

Post by DougH »

I dont know jack about it, but what about water injection to cool off the valve seats so the engine could work with LPG
DougH
95SR: locked front and rear, more coming soon.
Top
Posts: 2
Joined: Sun May 04, 2003 9:22 pm

Post by Anezka »

Maybe if I upgraded to Yella Terra heads (If they make them for the Paj) then gas would be ok?
91 3.0 V6 Auto Superwagon - bog stock ;)
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 9 guests