Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Difference between Disco 200 TDI and RRC 89 axles?

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 42
Joined: Thu Jan 29, 2004 12:13 am
Location: The Netherlands

Difference between Disco 200 TDI and RRC 89 axles?

Post by SeriousIIa »

Is there a strength difference between Disco 200 TDI and RRC 89 axles? When was the 24 spline introduced on the disco?

Cheers Bowy who has a RRC but can get a rolling chassis of a disco cheap. and needs stronger axles because of his 33's and future 35's
Image
http://www.seriousIIa.tk
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I think that the 24 spline rears were introduced towards the end of the 200Tdi's. Can't you just pull a rear axle and check?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 42
Joined: Thu Jan 29, 2004 12:13 am
Location: The Netherlands

Post by SeriousIIa »

Probably I can but I don't want to alert the seller ;)

And the seller is 200km away.... :( But will probably buy it anyway going to check it out this weekend.

Cheers Bowy
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

AFAIK, Discos have cheaper diff components than Rangies, the Disco spider gears are compressed powder gears while Rangie ones are cut gears. The part numbers are different .
I think the axles are the same.
Regards Philip A
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest