Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Transfer (additional) parts

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 4
Joined: Mon Aug 30, 2004 6:55 pm
Location: Israel

Transfer (additional) parts

Post by nirbaer »

hi all
I am new here, Nir from Israel and I just diassembled my '95 transfer case due to a worn bearing.

there are 2 parts which I am not sure where they came from and maybe someone can help me here:
1. small spring, I am preatty sute it was in one of the shifter springs I just don't know which one.
2. a small yellow plastic.

attaching a diagram of the shifter springs, and a pic of the parts.
thx.

http://img221.echo.cx/img221/6261/p41500784bz.jpg
You do not have the required permissions to view the files attached to this post.
Top
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

the spring will be a detent spring from shifter.the yellow plastic thing not sure :?:
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Top
Posts: 4
Joined: Mon Feb 14, 2005 7:20 am
Location: Toowoomba

yellow plastic thing

Post by Jimmys »

yellow plastic thing? is it about 25 to 30 mm long has an arm or two and looks like it is supposed to catch oil?
Top
Posts: 4
Joined: Mon Aug 30, 2004 6:55 pm
Location: Israel

Re: yellow plastic thing

Post by nirbaer »

Jimmys wrote:yellow plastic thing? is it about 25 to 30 mm long has an arm or two and looks like it is supposed to catch oil?


exactly, see the picture link.
Top
Posts: 4
Joined: Mon Aug 30, 2004 6:55 pm
Location: Israel

Post by nirbaer »

Another Q:
When closing the case, is it recommended to use a new universal gasket with red silicon or maybe use only silicon? the old gasket is worn out.
thx.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

you can use just silicon...
Top
Posts: 4
Joined: Mon Aug 30, 2004 6:55 pm
Location: Israel

Post by nirbaer »

fixed it.
found out that the big cover MUST have a gasket, otherwise one of the bearing is compressed and the shaft would not rotate, the gasket gives an extra ~0.5 mm needed.
btw still don't know what is the yellow plastic...
Top
Posts: 18
Joined: Thu Oct 21, 2004 11:50 pm
Location: NOR, Perth

Post by camor »

when i rebuilt my 1.3 transfer case, i never came across any plastic bits? the springs for 4wd switch, and the shifter locating ballbearings.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests