Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Putting 91 jap surf, into 84 aus hilux

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 6
Joined: Tue Jul 13, 2004 8:53 am
Location: Sydney

Putting 91 jap surf, into 84 aus hilux

Post by bdollo »

hey guys, i have just bought i 91 jap surf halfcut, computer injection, 2L turbo, with 4 speed auto. im going to be putting it into my 84 yn65 hilux that currently has a 3y 2.0l petrol mated to a 5 speed man.

just wondering if im gonna run into any major probs with the transfer case in the halfcut being the trick electronic type? as the halfcut is IFS with the auto hubs. any advice on anything to do with the changeover would be greatly appreciated!!

thanks guys
~bdollo

"Up the mighty HILUX"
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

as long as you run the transfercase as the one from the auto, it should be ok. i think the transfer case in the half cut would be a chain driven one.
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Post by runnin4life »

also for more questions see below topic
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=42890
Posts: 284
Joined: Fri Mar 12, 2004 3:43 pm
Location: Rockhampton

Post by skootin »

Did you get the auto and transfer sticks the four wheel drive computer should be in the cut?
If not the motor for H4 is easy to wire up to a rocker switch.
I'm not stuck I'm over here!
Watch where you driven!!!
Posts: 6
Joined: Tue Jul 13, 2004 8:53 am
Location: Sydney

Post by bdollo »

yeah i got the halfcut complete, engine, gearbox, transfer and computer...
~bdollo

"Up the mighty HILUX"
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

you will have to get a 2lD sump from sold front to change with ifs one on yeh donk
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Posts: 238
Joined: Mon May 03, 2004 8:56 pm
Location: Hobart Tasmania

Post by bushytas »

HI dude where did you get the half cut from do they have a web site thinking about doing something like that myself
Cheers
Brendon
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests