Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What Tie Rod End?????? HELP

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 127
Joined: Wed Oct 29, 2003 8:41 pm
Location: wellington NZ

Contact:
Contact eddie

What Tie Rod End?????? HELP

Post by eddie »

fj40 with hilux disk brakes fitted
when to fit up tierod ends but the cruiser ones have a too small taper

what tierodend do u use ??
any help will be good as im pulling my hair out trying to get it sorted
77 FJ40
www.advanced4x4.co.nz
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

Don`t the 40s arms bolt on?
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 127
Joined: Wed Oct 29, 2003 8:41 pm
Location: wellington NZ

Contact:
Contact eddie

Post by eddie »

4sum4 wrote:Don`t the 40s arms bolt on?


Nope :cry:
wish thay did
77 FJ40
www.advanced4x4.co.nz
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

i just posted on the other thread you made of this on the tech page
can't you swap the fortys tie rod and replace it with a hilux?
Top
Posts: 127
Joined: Wed Oct 29, 2003 8:41 pm
Location: wellington NZ

Contact:
Contact eddie

Post by eddie »

Tidy42 wrote:i just posted on the other thread you made of this on the tech page
can't you swap the fortys tie rod and replace it with a hilux?


yes u can fit it on but the left tierod end is desined to take a steering dampner and not a relay rod so the taper is around the wrong way..

so need to find a tierod end that is made for a relay rod to attach to.
77 FJ40
www.advanced4x4.co.nz
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

what you need is the steering arms from a BJ43 HJ-FJ47 Cruiser ( have some of these arm sets on the shelf and are getting hard to get ) from about 1979 on as these have the correct bolt position for the later disc brake svivel housings. Alternatively you can get taper bushes to fit small 40 series tierod ends into the later arms ( have got some new ones on the shelf as i use them when doing conversions ) or fit a 75 series track rod but it still gives you the problem of connecting the drag link as the track rod has a larger taper.

Wally
Top
Posts: 127
Joined: Wed Oct 29, 2003 8:41 pm
Location: wellington NZ

Contact:
Contact eddie

Post by eddie »

80UTE wrote:what you need is the steering arms from a BJ43 HJ-FJ47 Cruiser ( have some of these arm sets on the shelf and are getting hard to get ) from about 1979 on as these have the correct bolt position for the later disc brake svivel housings. Alternatively you can get taper bushes to fit small 40 series tierod ends into the later arms ( have got some new ones on the shelf as i use them when doing conversions ) or fit a 75 series track rod but it still gives you the problem of connecting the drag link as the track rod has a larger taper.

Wally


cheers for that :)
may try the 75s rod and end..

got a crown p/s box so sill have to find a pitman arm and make a draglink

any idea of the pitman arm i would need?

other wise if i was in aussy i would see about the parts u have
77 FJ40
www.advanced4x4.co.nz
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 52 guests