Okay, I just thought that I might condense all my random thoughts into one cohesive list of questions. Sorry to do a mind dump, but this is like therapy for me...
1. Does Safari make a snorkel that fits the mighty Bundy? ARB aren't too clear in their catalogue. Does anyone make a snorkel for Bundy's?
2. Will 80s series coil suspension bits work on a Bundy? Eg. OME kits etc. Something to try by myself with experienced supervision as well as changing bushings in general?
3. Are 33's ok on a Bundy after a 4" suspension lift? Will ratios need adjusting? Exhaust need moving? I am only considering going from 30's to 31's, but no harm dreaming right?
4. How much more boost can one get out of the factory turbo without overstressing the engine?
5. The gearbox seems reluctant when downshifting to 2nd, and reverse can be hard to get into, anyone else experiencing similar? Transmission fluid was changed at last service 1 1/2 months ago.
6. As a novice oiler, do I need to make special provisions for the upcoming Melbourne winter?
7. Exhaust upgrade a good idea? And if so, what kind?
8. What's a swivel hub? A service on this would set me back $1200+ or so I'm told.
Once again, thanks for reading, and hopefully, indulging these ramblings.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bundy upgrade questions...again!
Moderators: toaddog, Elmo, DUDELUX
Bundy upgrade questions...again!
1989 Landcruiser SX5 aka Bundy Jap Import
Completely standard... oops, I got Rancho adjustables
Completely standard... oops, I got Rancho adjustables
Re: Bundy upgrade questions...again!
Turby2LT wrote:8. What's a swivel hub? A service on this would set me back $1200+ or so I'm told.
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&category=10428&item=4549960603&rd=1&ssPageName=WDVW
Would this do, maybe?
Re: Bundy upgrade questions...again!
Turby2LT wrote:2. Will 80s series coil suspension bits work on a Bundy? Eg. OME kits etc. Something to try by myself with experienced supervision as well as changing bushings in general?
You can use standard 80 series front springs alround to lift it.
Turby2LT wrote:3. Are 33's ok on a Bundy after a 4" suspension lift? Will ratios need adjusting? Exhaust need moving? I am only considering going from 30's to 31's, but no harm dreaming right?
I have 33s with no lift.
Re: Bundy upgrade questions...again!
I.M.P.O.S.E wrote:I have 33s with no lift.
Don't you have the 80 series coils yet?
Re: Bundy upgrade questions...again!
V6 Bundy wrote:I.M.P.O.S.E wrote:I have 33s with no lift.
Don't you have the 80 series coils yet?
Nah not yet! Its somewhere on the to do list.
Then again so was that timing belt....
1. Does Safari make a snorkel that fits the mighty Bundy? ARB aren't too clear in their catalogue. Does anyone make a snorkel for Bundy's? ........... a 70 series snorkel will fit but u will have to make your own plumbing.
2. Will 80s series coil suspension bits work on a Bundy? Eg. OME kits etc. Something to try by myself with experienced supervision as well as changing bushings in general? .......... stock 80 series genuine front spings will give 4" lift but OME and alike r too stiff, dont worry about bushing stick with the rubber ones
3. Are 33's ok on a Bundy after a 4" suspension lift? Will ratios need adjusting? Exhaust need moving? I am only considering going from 30's to 31's, but no harm dreaming right? ...........33 will fit with no mods and stock suspension.
5. The gearbox seems reluctant when downshifting to 2nd, and reverse can be hard to get into, anyone else experiencing similar? Transmission fluid was changed at last service 1 1/2 months ago. .... probably just a bit worn dont stress just drive it.
6. As a novice oiler, do I need to make special provisions for the upcoming Melbourne winter? ........... only coolant/antifreeze if u r going to spend extended time in the snow.
8. What's a swivel hub? A service on this would set me back $1200+ or so I'm told.......... what your front wheel bolts onto... who quoted u that much??? buy the workshop manual and have a go your self....
2. Will 80s series coil suspension bits work on a Bundy? Eg. OME kits etc. Something to try by myself with experienced supervision as well as changing bushings in general? .......... stock 80 series genuine front spings will give 4" lift but OME and alike r too stiff, dont worry about bushing stick with the rubber ones
3. Are 33's ok on a Bundy after a 4" suspension lift? Will ratios need adjusting? Exhaust need moving? I am only considering going from 30's to 31's, but no harm dreaming right? ...........33 will fit with no mods and stock suspension.
5. The gearbox seems reluctant when downshifting to 2nd, and reverse can be hard to get into, anyone else experiencing similar? Transmission fluid was changed at last service 1 1/2 months ago. .... probably just a bit worn dont stress just drive it.
6. As a novice oiler, do I need to make special provisions for the upcoming Melbourne winter? ........... only coolant/antifreeze if u r going to spend extended time in the snow.
8. What's a swivel hub? A service on this would set me back $1200+ or so I'm told.......... what your front wheel bolts onto... who quoted u that much??? buy the workshop manual and have a go your self....
Re: Bundy upgrade questions...again!
I.M.P.O.S.E wrote:Turby2LT wrote:2. Will 80s series coil suspension bits work on a Bundy? Eg. OME kits etc. Something to try by myself with experienced supervision as well as changing bushings in general?
You can use standard 80 series front springs alround to lift it.
When using 80 seies coils front + rear does anything need to be modified, how much lift does that give, an how does it ride and handle.
Re: Bundy upgrade questions...again!
LJ70Turbo wrote:When using 80 seies coils front + rear does anything need to be modified, how much lift does that give, an how does it ride and handle.
Apparently not! I havent done it yet, so carnt talk form experience as far as mods and the ride and handling goes.
Who is online
Users browsing this forum: No registered users and 136 guests