Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hillbilly locker or not

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 510
Joined: Fri Feb 04, 2005 7:31 am
Location: Brisbane

Hillbilly locker or not

Post by whiteknight »

Thinking of welding up the front diff and putting it in the rear and putting the LSD from the rear into the front..

I also have a spare LSD what if I put LSD in both front and rear but I think one of them is pretty well worn out and is probably classed as a slippery diff now..

Advice on this please...????
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

Do you care about the wear rate of your rear tyres? A welded diff will chew them out, as the inside wheel on corners has to spin as fast as the outer, and hence is like constant burn outs...
Lovin the FZJ105-T, bling by Ryano
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

i hope you like busted axles :D
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

just have a look on the thread on a80series lsd on this page to were dumbdunce made a very good comment in regards to fitting a lsd in the front diff
Top
Posts: 477
Joined: Tue Sep 16, 2003 4:51 pm
Location: Canberra

Post by Slayer »

put the welded in the front. that way its not an issue unless u got the free wheelin hubs locked in.
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Don't waste your time with LSD up front. And dont bother
with hillbilly welded centres if your going to drive it on
the street every day, there a PITA.
www.bolsys.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests