Firing order for LN46

[DUR71 THOUGHTS]

Just finally fixed my timing belt and have checked my clearances on valves but need to find out the firing order so we can check it. I cannot find it in my manual. All the clearance specs are their but not the firing order. Does anyone know?

I have a tapping noise that gets worse when I accelerate.

[plowy]

speck should be in the manual some where

as for the tappin noise piston slap or number 4 big end knock perhaps
they were prone to it, the big end knock

need to put a oil press guage on it and compare with the specs to determine a big end knock
or on start up does the oil light take forever to go out?

[toysuzi]

hey hows it going dur71

firing order is
1342

set up no1 cylinder on TDC
set no1 & no3 valve clearance

then line up no4 cylinder on TDC
& set no2 & no4 valve clearance

its that simple

hope that helps

cheers
daryl

[DUR71 THOUGHTS]

Thanks guys, I'll see how I go.