Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Firing order for LN46

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 68
Joined: Wed Feb 25, 2004 10:08 pm
Location: Drewvale, Brisbane

Firing order for LN46

Post by DUR71 THOUGHTS »

Just finally fixed my timing belt and have checked my clearances on valves but need to find out the firing order so we can check it. I cannot find it in my manual. All the clearance specs are their but not the firing order. Does anyone know?

I have a tapping noise that gets worse when I accelerate.
83 Hilux 2.2L Diesel
2" lift kit
31" Simex Centipedes
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

speck should be in the manual some where

as for the tappin noise piston slap or number 4 big end knock perhaps
they were prone to it, the big end knock

need to put a oil press guage on it and compare with the specs to determine a big end knock
or on start up does the oil light take forever to go out?
Posts: 580
Joined: Tue Jan 20, 2004 7:49 pm
Location: port stephens

firing order

Post by toysuzi »

hey hows it going dur71

firing order is
1342

set up no1 cylinder on TDC
set no1 & no3 valve clearance

then line up no4 cylinder on TDC
& set no2 & no4 valve clearance

its that simple ;)

hope that helps

cheers
daryl
Posts: 68
Joined: Wed Feb 25, 2004 10:08 pm
Location: Drewvale, Brisbane

Post by DUR71 THOUGHTS »

Thanks guys, I'll see how I go.
83 Hilux 2.2L Diesel
2" lift kit
31" Simex Centipedes
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest