suzuki sierra 1.6l efi, any help?

[geckos]

I want to fit a 1.6l efi motor to my 94 sierra. I know someone makes the adapter plate for this converstion? But who? And what price am I looking at, for a complete 1.6L EFI motor? I believe I may need a body lift for this too? Just some general info too, suzisport has a supercharger kit available for sierra and vitara. I wonder how it goes?

[ZOOK60]

do a search dood

suziworks do the adaptor your after

if your good with the tools you dont need an adaptor plate

i have the single point 1.6l efi motor with no body lift fits great

[mike]

suzisport does a kit here
I got mine from the US (RRO-but I don't have any reason to recommend them)
many of the major suppliers in the US have one. here R some links
http://www.petroworks.com/
http://www.spidertrax.com/
http://www.puresuzuki.com/suzukimain.htm
http://www.trailtough.com/
If I was doin mine again I'd use the Vit gearbox as well and just manufacture new mounts

[geckos]

Thanks lads, what price should I be paying for a reasonable one? As long as it goes and has less than 200k on the clock? Anyone any help?

[-Mick-]

good luck mate I tried 6 months to find one but bugger all. Pm mud4b off here he can get em sometimes... I think a bit under 2.5 for a low k import front cut

[suz_rolly]

suziworks MUD4B do those conversions all the time he can also get the motors adapters and beable to tell you exactly what u need so there is no chasing of parts stuffing arround



they are a awsome motor

give him a call on 07 54791877

[mike]

suziworks MUD4B do those conversions all the time he can also get the motors adapters and beable to tell you exactly what u need so there is no chasing of parts stuffing arround



they are a awsome motor

give him a call on 07 54791877

I've dealt with him a few times for parts and have always had good dealings.
Mmmm trailtough doing a conversion kit for 2.0 litre Vit motor.....Mmmm
http://www.trailtough.com/engine.htm

[suz_rolly]

its not for the 2ltr v6 though

i have a 2ltr v6 vit and waiting for the mrs to crash it so i can have it for my suz


but still tough

[Pinball]

Shouldn't need a lift to do the 1.6 conversion.... same block
have to modify the mounts a little to drop it down, and a tab on the bell housing from memory..

Graeme and the boys at suzisport springwood did mine... sweet as..

and yes the 1.6 is becoming a hard engine to find

Spock

[mike]

Shouldn't need a lift to do the 1.6 conversion.... same block
have to modify the mounts a little to drop it down, and a tab on the bell housing from memory..

Graeme and the boys at suzisport springwood did mine... sweet as..

and yes the 1.6 is becoming a hard engine to find

Spock

Block is actually longer than the 1.3 so a body lift will help but I'm not sure if it's needed (I already had one)

[Sirzooky]

Go to http://www.suzisport.com/shop/ and you will see they sell short 1.6 motors for 850? and full fitting kits. they also sell supercharger kits for sierras for $2000. They also sell injection kits for 1.3 etc.

cheers

sadiq

[geckos]

Cheers all, all good help, 1.6 becoming hard to find? Mmmmmm......... That 2.0l sounds sweet....... I will keep this page posted with updates.
Already got the double air lockers warn 6000lb, lights, bigger tank, HD clutch, bullbar. The engine was next on the list to get......

[zuker1500]

Hey dude

Best person to speak to is suziworx. www.suziworx.com

They can get the adaptors and normally can get complete front cuts. I have done a few conversions up here with efi 1.6l engines and it is a really easy job to do. Should take no longer than a weekend to do it.

Dunno about using the vit gearbox though as i am running a turbo'd 1500 twin cam and only after years of getting driven very hard i have almost destroyed the gearbox.

I think in QLD doing a 2.0l vit motor is pretty hard to get engineered. There is something that says you cant go any bigger than a 1600 or 1800 but i cant remeber for sure. Do a search and see what you come up with.

Seeing you are in Townsville you should come out wheeling with us mad people. PM me and i will give you my mobile number as we go out nearly every second weekend!

[mud4b]

I think in QLD doing a 2.0l vit motor is pretty hard to get engineered. There is something that says you cant go any bigger than a 1600 or 1800 but i cant remeber for sure. Do a search and see what you come up with.

if its petrol.....

i can get a 2lt turbo diesel approved

[Guy]

Shouldn't need a lift to do the 1.6 conversion.... same block
have to modify the mounts a little to drop it down, and a tab on the bell housing from memory..

Graeme and the boys at suzisport springwood did mine... sweet as..

and yes the 1.6 is becoming a hard engine to find

Spock

Block is actually longer than the 1.3 so a body lift will help but I'm not sure if it's needed (I already had one)

Are you sure you dont meen taller ??

Still dont need a bodylift to do it though (unless its a 16V efi, as the the plenum needs a bodylift to clear unless you notch the chassis to clear the exhaust (as you need to mount the entire motor lower to get it to fit ..)

[Gwagensteve]

I think in QLD doing a 2.0l vit motor is pretty hard to get engineered. There is something that says you cant go any bigger than a 1600 or 1800 but i cant remeber for sure. Do a search and see what you come up with.

if its petrol.....

i can get a 2lt turbo diesel approved

I bet that sweet soft top conversion is approved too.

[mud4b]

no...

its a farm hack for aus zoo...

[muppet_man67]

that suzi looks a bit to british for my liking.

[ca18escort]

I am another one that will give Mark a rap, have got a fair bit of stuff from him and you can't fault the service or the price.


Paul

[mat k zookie]

hi can anyone help me out im doin a 1.3 to a 1.6 suzuki sierra does anyone no where i can get an adaptor plate for the starter motor i heard there is a place in N/Z cheers

[zukmeista]

Here you go.http://www.auszookers.com/index.php?nam ... ic&t=15009

[tazmanier]

Can vouch for BenT's kit (NZ) had everything I needed and very helpfull VIA e-mail.

-Sean