G,Day all.
Having a few issues with engineering the Rangie. Searched everywhere but unable to find out the height of the front & rear bars on a standard Rangie. Would anyone know this & the regulations regarding raised bars when it comes to engineering certification? Thanks in advance guys & girls.
Carl
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Front bar height
Moderator: Micka
Hi Slunnie
NSW. I.ve just spent the day driving around locking up brakes & corning excessively hard whilst being watched by the engineer & then examining skid marks. Everything turned out okay & then at the end of it all he said he wanted to check the height of standard bars because the car might fail just based on that. Bars have been raised to suit 2 inch body lift but vehicle also has 2.5inch spring lift & 33inch tyres.
Carl
NSW. I.ve just spent the day driving around locking up brakes & corning excessively hard whilst being watched by the engineer & then examining skid marks. Everything turned out okay & then at the end of it all he said he wanted to check the height of standard bars because the car might fail just based on that. Bars have been raised to suit 2 inch body lift but vehicle also has 2.5inch spring lift & 33inch tyres.
Carl
I've just had a look through the RTA VSI sheets and didn't see anything.
http://www.rta.nsw.gov.au/registration/ ... i_dl1.html
I would have thought that you'd be ok though with that setup. I've just had engineered a Disco with 4" lift and 35's which will result in a similar bumper height. The engineer for me was more concerned with the height of the lighting.
http://www.rta.nsw.gov.au/registration/ ... i_dl1.html
I would have thought that you'd be ok though with that setup. I've just had engineered a Disco with 4" lift and 35's which will result in a similar bumper height. The engineer for me was more concerned with the height of the lighting.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
Who is online
Users browsing this forum: No registered users and 0 guests