Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1FZ-FE Petrol into FJ45 Troopy Conversion - Radiator Q?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 16
Joined: Thu Jan 13, 2005 8:22 am
Location: brisbane

1FZ-FE Petrol into FJ45 Troopy Conversion - Radiator Q?

Post by shagz »

Guys/Gals,

Has anyone reading got an 80 series with this motor and a tape measure handy?

Just need to know the dimensions of the radiator - The total height? Width and length. The dimensions of both main section and as well as at the furtherest points - ie caps/mounts if possible as well would be great.

The engine mounts have been started last weekend but I am now in Africa (urgent work issue - don't ask ;) ) for a couple of weeks and need to organise a radiator as want to keep the cooling original so I know I will not have any issues. The engine has been in the rolling chassis supported by blocks to do a measure up and it looks like it was made for it :D

Will post some pix when I buy a new camera in a few weeks if anyone is interested.

BTW, does anyone know of anyone who has done this so I can talk to them? There is a guy in cairns I think who has done it and there are a few pics at Ih8mud.com, but emailed him with no answer :(

Cheers

Shane
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Hi
Id be real surprised if you get an original 80 rad to bolt in a 45...the 80 rad is wider than your front end.....
I would be looking for an fzj75 radiator for it.
Andrew
Posts: 16
Joined: Thu Jan 13, 2005 8:22 am
Location: brisbane

Post by shagz »

dow50r wrote:Hi
Id be real surprised if you get an original 80 rad to bolt in a 45...the 80 rad is wider than your front end.....
I would be looking for an fzj75 radiator for it.
Andrew


Hi Andrew,

Yeah I kinda guessed that, was wondering how much wider :)

BTW, do you have a 75 rad around to measure for me? or any other ideas as I have a space issue and fat stubby rads (like the orignial 45) aren't looking like fitting without major mods, was thinking a bit wider and subsequently thinner - like the original 80. Run a small thermo each each side of the water pump pulley and cut a few more vents into the front bib, anyways... Its either that or moving the engine back and cutting up the rear crossmember behind the gearbox, but either way its going to fit :D

Looks like I might be up for a trip to the wreckers when I get home...

Cheers
Shane
Posts: 50
Joined: Wed May 18, 2005 10:44 pm
Location: melbourne

Post by playtime 4x4 »

Yeah a 75 radiator will fit straight in.Bugger all width difference but apprx. 2" taller. I have one in my 45 to cool a chev but mine is fabbed alloy.Mounting is the mod needed
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests