Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series diffs under Bundera

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 26
Joined: Thu Sep 30, 2004 11:03 am
Location: Sydney

80 Series diffs under Bundera

Post by 80 nsw »

I am looking at putting 80 series diffs under a bundera. I have searched other posts but they give no specifics on the job.
1. Has anyone on this board done it. was it fairly straight foward, do you have pics.
2. Are the original control arms on the rear diff used or are new ones fabricated to suit and where were they attached to on the chassis
3. How far were the spring mounts moved on the front and rear diffs (inwards i assume).
4. What control arm was used on the front diff, was it the standard 80 or the bundera control arm.

Any other information that might be helpful to the task would be greatly appreciated.
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Mark from Marks 4WD adaptors done his own Bundy and was covered over a few issues of 4X4 monthly id say about 1 1/2 to 2 years ago.

Wally
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

4wd monthly did an article on this a while ago.
no.70 and no.71
september and october 2004.
pretty good read
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Does 4WD Monthly offer any back issues?

Dave
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

beanz2 wrote:Does 4WD Monthly offer any back issues?

Dave


yes they do. try www.4wdmonthly.com.au
Free air locker to the first 20 callers!
Top
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

beanz2 wrote:Does 4WD Monthly offer any back issues?

Dave


Yes but I have a larger range at my place and more :oops: Send me the location of your crate :P
Im sure Ill have sept and oct 2004 and more :P
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Thank you , sir. I've been wanting to fill up all the available space in the crate, LOL.

Check your PM.

Dave
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Hi 80 nsw
What year is your Bundy
The later Bundy's , ie high pinion 91 on?, have the same front arms as an 80
J Top
Top
Posts: 26
Joined: Thu Sep 30, 2004 11:03 am
Location: Sydney

Post by 80 nsw »

haven't purchased yet, doing the deal on sat. It is an 85 model, only had a quick look over as i'm only really after the body and chassis, but i thought i saw a high pinion, does this make sense, did the earlier ones have a high pinion front?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest