Hi all
I have been thinking about doing a diesel conversion on my surf. It’s an 87 two door model, I wouldn’t sell it for the world but as you all know the 2.4lt is under powered to hell I want to stick to diesel and want an easy conversion.
I’ve been looking around the net and found Oldsmobile v6 diesels 4.3l and also 13bt and 14bt Toyota 4c engines.
I want a bit of a power plant to stick under the hood but don’t want petrol, as it sucks when under water (yes I have a periscope on it) remember it is surf there built for water lol.
Anyway any ideas would be good and as much info as you can provide eg gear box bolts line up engine mounts etc etc
Cheers
Brendon
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
diesel conversion ??? what do you think
Moderators: toaddog, Elmo, DUDELUX
there was a thread already on something similar http://www.outerlimits4x4.com/PHP_Modul ... hp?t=44872
LETS GO BRONCOS
Info on yota engines...
http://www.birfield.com/~ramullen/FAQ/TEXT/05-04.html
Dont think youd wanna risk bolting a 14-BT to your gearbox, it should be a R151 but i dont think that would take the power...
a 14-BT is a big engine more designed for cruisers.. better to look at a 1KZTE, it will bolt up to your existing gearbox, only requires new engine mounts, engine loom, and some replumbing...
http://www.birfield.com/~ramullen/FAQ/TEXT/05-04.html
Dont think youd wanna risk bolting a 14-BT to your gearbox, it should be a R151 but i dont think that would take the power...
a 14-BT is a big engine more designed for cruisers.. better to look at a 1KZTE, it will bolt up to your existing gearbox, only requires new engine mounts, engine loom, and some replumbing...
Cheers,
Dan.
[i]1996 HDJ80R[/i]
Dan.
[i]1996 HDJ80R[/i]
SO is that a yes it will bolt up and you wouldnt like to see what it would do to the gear box or more no you would have to change stuff.
as for the engine that you talk about dan thats tdi ecm i would rather a standard old pump hanging of the side of the engine not as much to get wet please corect me if im wrong ???? im not up with 4wd's any more they seem to take big leaps when your not looking anyway ideas and info give me more lol i need to do something with my surf its getting to the point where im going mad
as for the engine that you talk about dan thats tdi ecm i would rather a standard old pump hanging of the side of the engine not as much to get wet please corect me if im wrong ???? im not up with 4wd's any more they seem to take big leaps when your not looking anyway ideas and info give me more lol i need to do something with my surf its getting to the point where im going mad
Cheers
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Brendon
2008 nissan patrol
Factory bullbar with 12000lbs ironman winch, PLESSEY_MTR96_UHF 100ch 25watts
needs diff lock F/R
Who is online
Users browsing this forum: No registered users and 3 guests