Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux transfer leaking

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 77
Joined: Sun Feb 27, 2005 4:06 pm
Location: hunter valley

hilux transfer leaking

Post by luxinator »

hey guys my transfer case in my 97 ln 106 single cab is leaking like a siv i have degreased and cleaned the whole thing to look for cracks and shit cant find anything is there a common thing that goes in these ?
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Re: hilux transfer leaking

Post by 4sum4 »

luxinator wrote:hey guys my transfer case in my 97 ln 106 single cab is leaking like a siv i have degreased and cleaned the whole thing to look for cracks and shit cant find anything is there a common thing that goes in these ?
were is it leaking from?
if its from an out put shaft its more that likely the bearing is gone
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Posts: 26
Joined: Thu Sep 30, 2004 11:03 am
Location: Sydney

Post by 80 nsw »

if its from an out put shaft its more that likely the bearing is gone
If its coming from the around the output shaft its more likely to be the output seal, not the bearing.
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

the seal would have gone because the bearing has gone and is letting the shaft flop around.
Posts: 26
Joined: Thu Sep 30, 2004 11:03 am
Location: Sydney

Post by 80 nsw »

Guts
Posted: Thu Jun 02, 2005 7:11 pm

--------------------------------------------------------------------------------

the seal would have gone because the bearing has gone and is letting the shaft flop around.
a possibility. more often than not mud/dirt gets into the seal which causes it too leak, there is also the possibility that the seal is old and begining to perish. Personally i wouldn't be jumping to the conclusion that the bearings need replacing without looking at the simple things first. Then again diagnosis without viewing is not easy. After all when you do a rear main seal how often do you strip the motor to replace the crankshaft bearings?
Posts: 77
Joined: Sun Feb 27, 2005 4:06 pm
Location: hunter valley

Post by luxinator »

i think it is coming from the driveshaft area beacause there is shit load of oil around it from when it has been engaged in 4wd is this an expensive thing to fix?
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

luxinator wrote:i think it is coming from the driveshaft area beacause there is shit load of oil around it from when it has been engaged in 4wd is this an expensive thing to fix?
Sounds like a good excuse to get crawler gears while its out
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Posts: 77
Joined: Sun Feb 27, 2005 4:06 pm
Location: hunter valley

Post by luxinator »

im hearing you these rock crawling gears do they only affect low range 4wd or high range 4wd aswell??
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

luxinator wrote:im hearing you these rock crawling gears do they only affect low range 4wd or high range 4wd aswell??
I hilux they do not affect high range.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest