Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bundera and 80 series coils??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 96
Joined: Sat Nov 20, 2004 2:38 pm
Location: Newcastle

bundera and 80 series coils??

Post by Syzygy »

are 80 series front coils a straight swap into a bundy?

if not what has to be adjusted?
1986 2L-T Bundera
Top
Posts: 615
Joined: Thu Oct 23, 2003 12:37 pm
Location: Brisbane, QLD.. Posts: Too Many.

Post by Meldge »

I've heard two conflicting stories, one says yes big left, and the other is a no...

I've been no help but others should be able to clear it up.

I looked at a Bundy a couple of years back and the owner said it had stock 80s coils in it, so maybe they do...
Meldge...

86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...

[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Top
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Contact:
Contact Mad Cruiser

Post by Mad Cruiser »

Stock 80 series coils are cheap, or usually given away free..... why don't you try some ?
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

I believe you can fit front 80s coils into 70s rear, which gives 30-40mm of lift.

No solution for the front, though :cry:
Top
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

yes they do

for all tech about this message dumbdunce his bundy ran heaps of different setups using 80 series coils
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Monty wrote:yes they do

for all tech about this message dumbdunce his bundy ran heaps of different setups using 80 series coils
or just do a search!


long story short - 80s front coils will fit front and rear in a bundy, stock ones give approx 3" lift. there is lots of cheap stuff you can do to get bundy suspension working well. search!
Free air locker to the first 20 callers!
Top
Posts: 96
Joined: Sat Nov 20, 2004 2:38 pm
Location: Newcastle

Post by Syzygy »

done plenty of searching, found a few conflicting posts though

thanks
1986 2L-T Bundera
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

dumbdunce wrote:
long story short - 80s front coils will fit front and rear in a bundy, stock ones give approx 3" lift.
Aren't 80 series coils larger in diameter than 70 front?
Does somebody have specs (length, wire diameter, coil diameter) for stock 80 series coil springs?
Top
Posts: 126
Joined: Sun May 01, 2005 11:29 am
Location: Sunshine Coast

Post by unwritten »

Standard 80 series coils- Length 475mm, Coil dia. 150mm, Wire dia. 15mm. Hope that helps
Because I can...
Smoking after sex causes pregnancy.
It's hard to be serious when you're naked.
Top
Posts: 18
Joined: Thu Oct 07, 2004 11:03 pm

Post by vando3 bundy »

they do fit, mine is sitting in the driveway with them in, coils were cheap running standard in front and pedders standard height progressive rates in rear as dumbdunce suggested. When i spoke with the bloke at pedders he said that the early 80 series carby ones i think? coils were longer so got those for the rear but think the fronts are out of a newer 80, also got Koni shocks to match through through barry at top performance in VIC bundy is now bieng rebuilt as she rolled onto roof :armsup: after a broken diff on a steeeeep hill
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

unwritten wrote:Standard 80 series coils- Length 475mm, Coil dia. 150mm, Wire dia. 15mm. Hope that helps
Is that front or rear?
Dia - inner our outer?
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

the 80s front coils are about the same diameter as the bundy rears, but they also (just!) squeeze into the front mounts. the pigtail is the same on both sothe bottom perches fit well.
Free air locker to the first 20 callers!
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

Looks like 80 coils are a "bit" higher than exprected, giving closer to 4" of lift!
Is it too much? Will I fall sideways easily? :armsup:
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

MKarmyshev wrote:Looks like 80 coils are a "bit" higher than exprected, giving closer to 4" of lift!
Is it too much? Will I fall sideways easily? :armsup:
bunderas always fall sideways easily. fit wider tyres (12.5") on wider offset rims, and drive carefully!
Free air locker to the first 20 callers!
Top
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

if it helps... I measure my coils on my 70 series before i put new ones on.

Front: 445mm long, 15mm wire, 100mm diameter coil
Rear: 450mm long, 18mm wire, 85mm bottom/125mm top diameter
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

harvey, thanks a lot!

Did somebody made limiting straps so that axle don't hang on shocks?
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

mick hayes at superior engineering makes limiting straps, adjustable and fixed. give his site a look www.superiorengineering.com.au
turbos are nice but i'd rather be blown
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

Does somebody have numbers on hand - distance between axle and upper limiting bumpstop?
I need to check how much lift I got :armsup:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 28 guests