As title suggests i have a 4.7L short motor and was wondering what it was worth. It started its life as a 3.9L and was bored and stroked. It has done about 200,000km and would probably need a rebuild.
Cheers
Rob
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4.7L Short Motor, whats it worth?
Moderator: Micka
Rob, these posts can only be opinions as there are few facts.
A brand new 4.6 cross bolt is now $3600 from Graeme Cooper.
A 200,000 KM 4.7 may/probably will need oversize pistons. are they available? I believe 4.7 usually has 20thou oversize , so the next probably would be the limit., if they can be obtained. Remember sales of these are now zero because of 4.6 availability.
You are probably talking regrind crank, bearings, pistons at least .
So I reckon from near zero if no pistions available to maybe $1000-1500 if pistons available, unless you find a wood duck who doesn't realize that the pistons are very non standard with higher gudgeon location.
Reagdrs Philip A
A brand new 4.6 cross bolt is now $3600 from Graeme Cooper.
A 200,000 KM 4.7 may/probably will need oversize pistons. are they available? I believe 4.7 usually has 20thou oversize , so the next probably would be the limit., if they can be obtained. Remember sales of these are now zero because of 4.6 availability.
You are probably talking regrind crank, bearings, pistons at least .
So I reckon from near zero if no pistions available to maybe $1000-1500 if pistons available, unless you find a wood duck who doesn't realize that the pistons are very non standard with higher gudgeon location.
Reagdrs Philip A
Who is online
Users browsing this forum: No registered users and 0 guests