My reverse swith is Fubar'd. I've replaced the bit that screws into the gearbox with no joy. I'm told that from here it's a pull the gearbox out and apart to fix. I've bodge'd a switch off the gearstick but this is less than ideal.
Does anyone have any thought/experience?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Reverse switch
Reverse switch
If it's already been thought of...
There has to be a better way...
There has to be a better way...
nup just do what it sounds like you have done. get a little limit switch like pinball said and mount it to a bit of tin, then tech screw in place, worked for me.
ok so I added nothing new
enjoy
ashley
ok so I added nothing new
enjoy
ashley
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
Who is online
Users browsing this forum: No registered users and 7 guests