Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

We need your Warn Out LT230 Input gears

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

We need your Warn Out LT230 Input gears

Post by RUFF »

We are in need of Warn out LT230 Transfer case Input Gears. Those that have LT230s with a few Miles on them would know about replacing these. They wear the internal spline and the gear then needs to be replaced. We need a few of these to modify for a conversion we are doing so if anyone has any of these lying around after replacing them we would be interested in purchasing them. Dont throw them out they are no longer junk. Please PM me if you have any or know of anyone who has any.

May also be interested in Complete LT230s in any condition at reasonable prices.
Top
Posts: 166
Joined: Tue Sep 28, 2004 8:12 pm

Post by disco95 »

Will you swap a slightly worn one for a good one? :lol: :lol:
Top
Posts: 329
Joined: Thu Nov 07, 2002 5:24 pm
Location: Brisbane

Post by derangedrover »

What ratio hi range?

Cheers
Daryl
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

disco95 wrote:Will you swap a slightly worn one for a good one? :lol: :lol:
With Cash adjustment yes. But we dont have any Spud Shafts to go with these.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

derangedrover wrote:What ratio hi range?

Cheers
Daryl
Realy doesnt matter. But most of the Transfer cases we have in stock are 1.22:1 so this is the prefered one.
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

try peter from range parts, he rebuilds alot. 98962355. out of curiousity, what are you up to? twin case adaptor or somthing?
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

andrew e wrote:try peter from range parts, he rebuilds alot. 98962355. out of curiousity, what are you up to? twin case adaptor or somthing?
No just adapting them to other Transmisions so they need to be Re-Splined. We may look at selling these as a conversion in the future.
Top
Posts: 12
Joined: Mon Jun 13, 2005 4:29 pm
Location: Victoria

More info please

Post by Gaz69 »

RUFF wrote
No just adapting them to other Transmisions so they need to be Re-Splined. We may look at selling these as a conversion in the future.
Would these transmissions be any manuals at all ? I have been trying to get a NV4500 to LT230 adptor kit in OZ but have had no luck. I want to put a decent 5 speed behind my 6.2L diesel in my 88 Rangie as i do not want the ZF auto or a T700. Any info on what you are doing would be appreciated.

Cheers Gaz
6.2L 1988 rangie
130 Defender ute
1977 Rangie awaiting engine
2001 130 and 6.6LT Duramax and 6 Speed Allison being installed
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Sorry Gaz its for a T700 Adapter
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Re: More info please

Post by ISUZUROVER »

Gaz69 wrote:RUFF wrote
No just adapting them to other Transmisions so they need to be Re-Splined. We may look at selling these as a conversion in the future.
Would these transmissions be any manuals at all ? I have been trying to get a NV4500 to LT230 adptor kit in OZ but have had no luck. I want to put a decent 5 speed behind my 6.2L diesel in my 88 Rangie as i do not want the ZF auto or a T700. Any info on what you are doing would be appreciated.

Cheers Gaz
I think your best bet for one of these is to buy from the US - I think BCB makes this adaptor.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Contact:
Contact bushy555

Re: We need your Warn Out LT230 Input gears

Post by bushy555 »

RUFF wrote: May also be interested in Complete LT230s in any condition at reasonable prices.

Have a complete 1983 LT230 (1.001 ratio) sitting on the bench with a stripped input gear spline. Been sitting there for nearly 12 months now - I started stripping it to replace the input gear to have a complete ready-to-go spare transfer, but kinda got distracted.

Interested at all?
Top
Posts: 12
Joined: Mon Jun 13, 2005 4:29 pm
Location: Victoria

Post by Gaz69 »

RUFF wrote
Sorry Gaz its for a T700 Adapter
Bugger. Thanks anyway and give us all some details of your kit when you get it done.

ISUZUROVER wrote
I think your best bet for one of these is to buy from the US - I think BCB makes this adaptor.
I think you are right there. Have checked out there web site before but will have to ring / fax them as they do not seem to have a email address listed. Thanks for your help guys.

Gaz
6.2L 1988 rangie
130 Defender ute
1977 Rangie awaiting engine
2001 130 and 6.6LT Duramax and 6 Speed Allison being installed
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests