Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

double cardin joint question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

double cardin joint question

Post by DR Frankenstine »

Can a cardin joint be re-built? mine is making nasty tink tink noises and the occasional crunch it has a small amount of movement in the cage (probably 1-2 mm)
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Yep, it depends on what worn though, especially the ball joint in the middle.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

a bit tricky you can buy a non roller bearing center ball its solid brass i used to make drivesharfts dont use hammer and punch to fit the new unis use a hand press or vice :D
LETS GO BRONCOS
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

joint

Post by DR Frankenstine »

Got a quote today from hardie spicer $250 which is new unis and new centre kit fitted. Not to bad really!!
Top
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

if you dont have the tools and i dont know how good your mech. skill is get it done :D i would only do mine because if done 100th in the past but if want a go just post it :D
LETS GO BRONCOS
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest