Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

guard chopping

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

guard chopping

Post by Duff »

im going to cut the guards on my patrol to fit bigger rubber. has any one got a run down on how they did it. i cut a little and once you cut the guard theres a hole where the body pannel meets the wheel well guard. how do people fill this hole up. i was just thinking of sikaflexing it all up
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: guard chopping

Post by bogged »

Duff wrote:im going to cut the guards on my patrol to fit bigger rubber. has any one got a run down on how they did it. i cut a little and once you cut the guard theres a hole where the body pannel meets the wheel well guard. how do people fill this hole up. i was just thinking of sikaflexing it all up
check the nissan forum there was a few of these done a few months ago
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

yer i did a serach and there is no real answer to how to do it exactly.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

i got 3 inches out of mine used the inner gurad/ wheel arch bashed that up to meet the pannel i chopped and welded it up there


thou in the rear needs some sheet metal as i couldnt get enough out of the wheel arch
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

u talking bout a rear 1/4 chop or the front guards Andrew ?

if u want info on the rear 1/4's give A1MAV a PM.
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

ive done the quater chop i just wanna trim the wheel arched back to allow some bigger rubber like 38 or 39
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

ok, give A1 a PM as he has opened up the rear of his rear wheel arch, coz he has moved his rear diff back a bit.
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=39167

thats a fair load of info too. and some in french too boot!
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

use a jigsaw ans steel cutting blades. use electrial tape as a guide/ protector. i welded some 50x3mm on the edge for something to bolt rubber to
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest