Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power Steering LEAK FJ40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Power Steering LEAK FJ40

Post by matt.mcinnes »

Power stering leaking!

Any one out there able to help? i have a intermitant problem with the power steering leaking on my FJ40. It had a power steering conversion done with everything up graded to 75 series and all works fine except for the occasional leak from the power steering pump (Toyota). The leak comes from the output shaft to the pully and the leak only seems to occure when its worked real hard. EG trying to find traction in deep ruts or after a hard full on section of throwing the old girl around. The pump thats on is fully reconditioned and replaced the excisting one that had the same problem.
The power steering center says it wll always happen when trying to turn the wheels, when they cant actually turn EG in deep ruts or in simialr situations where the steering is been overlaoded. Is this just bullshit or true is there a more suitable pump out there, if so what?

Any help welcome Matt
You do not have the required permissions to view the files attached to this post.
Last edited by matt.mcinnes on Sun Jun 19, 2005 4:53 pm, edited 1 time in total.
Posts: 193
Joined: Mon Apr 26, 2004 6:38 pm
Location: Castle Hill, Sydney

Post by 40 lover »

yeah myh pump is leaking as well, watch out for fluid leaking into the altenator as the pump as most probably right on top of it, this happened to me and it stuffed the inside of the altenator and the battery wasnt charging, and your car wont start ;)
DRIVE IT HARD, TOW IT HOME
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

I reckon that happened to me once and to fix it i got a kit and replaced a couple of o-rings.
www.3rdrock4x4.com
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

scotto wrote:I reckon that happened to me once and to fix it i got a kit and replaced a couple of o-rings.
Thanks for that but i had recon pump fitted to cure it but to no avail and im now on my third pump, so it seems more of a pump problem than a seal problem. It only leaks under extrem pressure when on the simexs at 6psi. I know its the o'ring the fluid passes and these have been replaced in the past. It runs dry at all other times with not even a slight leak.
I was woundering if an oil cooler is the way to go?
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

I used to run a front lock rite locker and 33s and at 20 pound and the oil used to get so hot it would p!ss out all over the place imo the strain

I run 34s through 60 steering and sometimes has struggled a bit.
So got a power steering cooler from a Magna it's mounted in front of radiator - and the on/out pipes off it bend around the side of it perfect for a 40 had no complaints since. A mate who runs 36s seems to have cured a similar problem too. Will take a pic...
www.3rdrock4x4.com
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

scotto wrote:I used to run a front lock rite locker and 33s and at 20 pound and the oil used to get so hot it would p!ss out all over the place imo the strain

I run 34s through 60 steering and sometimes has struggled a bit.
So got a power steering cooler from a Magna it's mounted in front of radiator - and the on/out pipes off it bend around the side of it perfect for a 40 had no complaints since. A mate who runs 36s seems to have cured a similar problem too. Will take a pic...
Great thanks for that, it was certainaly one of the posibilities i was looking into. My power steering pump sits right next to the extractors too on my 2F which wont help either. My Email is for the photo of yours set up.
Last edited by matt.mcinnes on Sun Dec 16, 2007 5:12 pm, edited 1 time in total.
Posts: 18
Joined: Mon Apr 18, 2005 8:18 pm
Location: Perth ,Western Australia

Post by Robbo171 »

i'm interested in how your lockrite locker holds up in a shorty with your mods....
i've been told...via a forum here in perth that they arent suited for cruisers..is this true?
are they as weak as people say?
Shorty40 "KING OFF THE ROAD"
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

Robbo171 wrote:i'm interested in how your lockrite locker holds up in a shorty with your mods....
i've been told...via a forum here in perth that they arent suited for cruisers..is this true?
are they as weak as people say?


Sorry i cant help you there. Running ARB Air lockers front and rear.
but if you want a full list of Mods here it is. FJ40 SWB, Running a 2F, rebuilt and balanced gas cam too, 4 speed with ARB lockers front and rear, Simex 34insx10.5 JT2,s, Second Airs, Warn 8000lb high mount with Dynamica winch rope and Optima dual batteries M31D, constant air backed up by an ARB compressor, Rancho 9000 adjustables, anti inversion shakels, extractors into custom exhaust, cut down bull bar, and cut rear arches. Think thats everything oh and heavy duty altenator 80Amp, magellan FX324 colour GPS, Four point cage with Diaganal brace and cage comp spec, outback over head counsole for a 100 serise. not to mention the 75 series leaky power steering!
Mods to Come 4.56 or 4.8's crown and pin diff ratios, new 6 point cage to comp specs, 35ins Centipieds. Plus any little things we can think of.
I have no body lift or spring over conversions or extended shakles.

Scotto was the Fj with Lockrite's in try him.

Regards Matt
You do not have the required permissions to view the files attached to this post.
Last edited by matt.mcinnes on Sat Jun 18, 2005 3:10 am, edited 1 time in total.
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

Need pics matt maybe some in members section, never have to many 40's

BJ
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

Without pulling the headlight surround off, here's how the magna cooler slotted in. Made a bracket with angle and it's mounted to headlight surround panel. My front is very busy - leights, winch, I have not had heating problems cause of airflow, but it is a diesel.

Matt - start a members thread mate and feed us some pics that 40 sounds orrrsome :armsup: and where are ya


Robbo see if this covers it...
http://www.outerlimits4x4.com/PHP_Modul ... t=lockrite
You do not have the required permissions to view the files attached to this post.
www.3rdrock4x4.com
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

scotto wrote:Without pulling the headlight surround off, here's how the magna cooler slotted in. Made a bracket with angle and it's mounted to headlight surround panel. My front is very busy - leights, winch, I have not had heating problems cause of airflow, but it is a diesel.

Matt - start a members thread mate and feed us some pics that 40 sounds orrrsome :armsup: and where are ya


Robbo see if this covers it...
http://www.outerlimits4x4.com/PHP_Modul ... t=lockrite
Thanks for the pics, i doubt it will give me an over heating problem. One question any idea of the year of Magna.
You do not have the required permissions to view the files attached to this post.
Last edited by matt.mcinnes on Sat Jun 18, 2005 4:00 pm, edited 1 time in total.
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

hehe, thats me!!

marin
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

marin wrote:hehe, thats me!!

marin
HEHE yep I had to winch up behind him in the hole, the jeep could not winch him out from infront battery died winching himself through, winched him from behind on a winch block. We did talk him in to driving the above hole without a winch though.
SEE pic In my previous post
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

Scotto another member ;)
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

marin wrote:hehe, thats me!!

marin
:shock: Come on Benny when are you taking us out :D
www.3rdrock4x4.com
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

uhhhh.... not to sure of Magna year sorry.
Went to a wreckers at top of Sth Gippsland Hway (Dandenong) there were LOTS of them...
www.3rdrock4x4.com
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

scotto wrote:uhhhh.... not to sure of Magna year sorry.
Went to a wreckers at top of Sth Gippsland Hway (Dandenong) there were LOTS of them...
Matt loves his FJ40 and would never buy anthing from the wreckers for it :D only new for my baby.

By the way im in Mitcham Melbourne.
You do not have the required permissions to view the files attached to this post.
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

scotto wrote:
:shock: Come on Benny when are you taking us out :D
When i can find 2 front tyres that will stay on the rims for more than half a trip!

marin
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 90 guests