Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

maxidrive or ARB air locker

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 111
Joined: Wed Jun 15, 2005 10:44 am
Location: yinnar south

maxidrive or ARB air locker

Post by mopar rangie »

whats the best and why for a rangie.run a auto locker with maxidrive axles down back.need to fix up the front.broke short inner again.maxidrive setup or arb and better axles.what do you think.
smooth rides with power
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

maxi drive
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

either jacmac lockers and axles or maxi drive locker and axles.

If have arb then fit either JM or maxi axles.

If fit a detroit or simiilar also fit above axles.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 10
Joined: Wed Apr 27, 2005 6:12 am
Location: Melb

Post by hiline »

i run the air locker with maxi axles

no problems yet :lol:
Top
Posts: 58
Joined: Mon Sep 13, 2004 2:33 pm
Location: bogged in the backyard only track stiil open

Post by trr35l »

twin maxi's with maxi axle love then no wait time for air pressure
rover gone zook here i come
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

Maxi Drives all round, solve all your breakage issues. ARB's are also good but extras like upgraded axles, etc... can add up to almost the cost of a maxi, main reason I went that way :D

Had the rear one for 7 years (got that from one of the Rangies I had, kept it of course when I off-loaded that Rangie :cool: ). Finally got a front one this year now that I have a few more $$ in my pocket :armsup: .

Off-road adventures can now be breakagge free, well almost :) The CV's are the next line in breakage :bad-words:

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

trr35l wrote:twin maxi's with maxi axle love then no wait time for air pressure
Shame about trying to turn for the next 10-20secs after u disengage a front maxi! :rofl:

Go the air lockers with either brand of axles!
Top
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

As Big Steve said, i've heard many people complain about the time it takes for a maxi-drive to disengage.
I've got a maxi-drive rear, but i'm leaning towards an ARB for the front with maxi axles.
As for quality, i'd say the maxi-drive is superior to ARB though, and a much simpler locking mechanism.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Strength:

Jacmac: has superior locking system and now has the option of air pressure.
Maxi: most popular and most well known upgrade for rovers.
ARB: will cost the same as the above once axles are included.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

BIg StEvE wrote:
Shame about trying to turn for the next 10-20secs after u disengage a front maxi! :rofl:

Go the air lockers with either brand of axles!
My rear takes about that but the front takes about 3-4 seconds once you unload it (the rear one is about 15 year old so I would assume that the splines that engage the locking dog are slightly twisted after copping abuse for this amount of time :!: ).

Your ARB air lockers will take a couple of seconds to do the same. Remember, it's under load and doesn't disengage straight away :D

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

trr35l wrote:twin maxi's with maxi axle love then no wait time for air pressure
If you are about to tackle an obstacle that may need the use of lockers then the compressor is on before you begin.

I generally leave the compressor on anyway when on a track.

Either are good.

Dave
Land Rover Discovery - GQ conversion underway
Top
Posts: 58
Joined: Mon Sep 13, 2004 2:33 pm
Location: bogged in the backyard only track stiil open

Post by trr35l »

what do you do if your arb compressor dies half way into the track with maxi's i have been told although not had to yet you can work by hand if you need too as i say i have not tried yet

as for the front turns off almost right away

the twin maxis came with car i did not put them in myself
rover gone zook here i come
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest