Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo Patrol Ute

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3
Joined: Tue Apr 05, 2005 3:11 am
Location: northland

Turbo Patrol Ute

Post by john the fencer »

Hi all I've got a 96 GQ Patrol ute 180,000klm and turboing it was wondering if it's a good idea to replace the bigend shells while the sump is off for welding the oil return,and also if the plug at the rear under the manifold is a good place for the water return. :?:
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

big ends shouldnt be a problem... as they gotta be run in and etc.. leave them if they're not giving you any dramas.. as they're not known for having problems unlike yotas..

i just plumbed my water for the turbos into my thermostat housing and the radiator pipes..

have a look at the GU 4.2 td setup.. and you'll catch on.

TOM
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Use top of thermostat and that fitting under rear of exh manifold.

Bazzle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests