Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

does anyone know bout cruiser steering??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 458
Joined: Thu Jun 23, 2005 7:59 pm
Location: Shah Alam, Malaysia

does anyone know bout cruiser steering??

Post by bIg_ReD_bOiNs »

does anyone know what could be wrong, my steering makes a klunk noise when it nears full lock either way and also as it comes back from full lock.
75 series - in progress...

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=178771
Posts: 183
Joined: Wed Nov 12, 2003 4:52 pm
Location: Brisbane

Post by Tooheys »

pretty sure you'll find its the springs moving sideways a little bit as the swivel hubs hit the stops the box pushes the whole axle and the springs slide on each other and hit the clamps which makes the CLUNK. Ive seen a couple of 75's do this just get a mate to turn the wheel while you have a look at the springs im pretty sure you'll find this is whats making the noise :D

Cheers Tooheys
If at first you dont succeed.......get a bigger HAMMER!!!
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

if it is the springs making the noise , to fix it is to lift the rig up as too let the springs sit at full droop and wedge a screwdriver inbetween each leaf and smear grease in there
the noise most occurs after it has rained and the suspension gets wet
also may pay to check the tension of the u bolts too

after greasing the spring pack it will ride a bit smoother as the grease helps the springs to slide against one another
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

Post by vanzbrown »

Yup, i agree with springs... My 60 does that too, Have jacked it up, loosened the springs, straightened and tightened, and was good for a few weeks, not back to where they started.

Looking at getting new springs sooner rather than later, so not really bothered by it...

Cheers
VB
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

My hilux did the same thing clunks when you turn lock to lock had me baffled for weeks till i got a mate to have a look while i turned the wheel problem found, problem fixed put new springs in (needed it anyway)
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Posts: 127
Joined: Wed Oct 29, 2003 8:41 pm
Location: wellington NZ

Post by eddie »

check ya steering dampner,
had one that came into work doing that so we took it off and it stoped
then put a new one on and all was good

may not be the prob but worth a try at least
77 FJ40
www.advanced4x4.co.nz
Posts: 14
Joined: Sat Apr 02, 2005 9:10 pm

Post by kruiser »

my 80 series clunks when on full lock left or right . if i turn just of lock its fine if i do a u turn full lock is like a series of clunks any idea wat it is
1990 80 series
turbo diesel
50 mm lift
ARB bullbar
spotties
31 BFG AT uhf safer snorkel
Posts: 14
Joined: Sat Apr 02, 2005 9:10 pm

Post by kruiser »

my 80 series clunks when on full lock left or right . if i turn just of lock its fine if i do a u turn full lock is like a series of clunks any idea wat it is
1990 80 series
turbo diesel
50 mm lift
ARB bullbar
spotties
31 BFG AT uhf safer snorkel
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

kruiser wrote:my 80 series clunks when on full lock left or right . if i turn just of lock its fine if i do a u turn full lock is like a series of clunks any idea wat it is
Put a dollop of grease on your steering stops.
Post Reply

Who is online

Users browsing this forum: No registered users and 55 guests