Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Materials for Body lift blocks

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Materials for Body lift blocks

Post by ozy1 »

I have been considering doin a 2" body lift for some time now,

I am looking to you all for some help. I have the choice of 2 materials.
1. Aluminium
2. Polyurethane

I can get blocks made from both for nothing, but i am unsure on the best one to use. If anyone can help me out with the pro's and cons it would be greatly appreciated.


Shawn
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

i had poly ones for about 3 years without problems.
whats the rules on them from an engineer ?
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

I made my own poly ones on a lathe ... cuts like butter that stuff and hard as nails
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

My body lift blocks are 75mm dia. HDPE (High Density Polyethylene). Got a meter of it from a plastics place for $60.

Very easy to work with. 75mm dia. went in no problems into the Mav'. Get good (High tensile bolts washers and nylocks, and you'll have no problems.

Regards
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

thanks for thw input fellas, it was much appreciated, would have liked to hear from guys using aliminium bot hey, whos gunna cry over that,

Shawn
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

I have used both, the problem with aluminium is you have to use a rubber washer between the block and the body to stop electrolytic (sp?) rust. That rubber affords a little bit of movement, which on a car with a peice of shit tinnie body like a GQ is enough to start things cracking..
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 66 guests