Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Extractors

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Extractors

Post by Hybrid »

A couple of zorst questions

1. How do I identify a good set of extractors at a wrecker?
2. To work out if their tuned or not is it as easy as measuring the length of each pipe?
3. Is there a certain type of metal that I should look for?
4. What are some good brands to look for?
5. And finally what size would be best for a 3.8L V6

John
Top
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Contact:
Contact suprasurf

Post by suprasurf »

Most of what your are asking goes out the window when you stick the motor in the hole and end up with bugger all room for anything, all the science is forgotton in the quest to just make it fit :(
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

I wouldnt worry about trying to find tunned length extractors for a Commodore V6 it wont make much difference to the performance.Most of the second hand extractors you buy will fit into a hilux and basicaly as long as when you pick them up they dont drop a heap of rust out from inside you should be right.
IMHO dont wast your money on them as the factory manifolds work fine and you could find something better to spend it on.
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

Thanks fellahs

I thought as much when i first got the motor but then I was stupid enough to look at sites about young guys and their "monster" VNs. A couple of these stated the standard manifolds dont flow that well and as usual I started doubting myself. I'm sure whiteys will point me in the right direction for setting it up when the engines done anyway.
Top
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Contact:
Contact suprasurf

Post by suprasurf »

If you use the factory extractors check them throughly as they are known to crack. If I remember correctly its always the same side, can't remember which side tho, and the wreckers know this and charge accordingly
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Hybrid wrote:Thanks fellahs

I thought as much when i first got the motor but then I was stupid enough to look at sites about young guys and their "monster" VNs. A couple of these stated the standard manifolds dont flow that well and as usual I started doubting myself. I'm sure whiteys will point me in the right direction for setting it up when the engines done anyway.



Yeah unless you are building this thing for big HP then i think Marty will tell you the same thing.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest