Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Damaged Centre Diff Cross
Moderator: Micka
Damaged Centre Diff Cross
Hey
Well the sound ended up being a broken centre diff cross shaft?
Any idea what could have caused this breakage. I tought LT 230 were among the most durable.
Could it be from the 36" tyres?
I will post up some pics tomorow how much should they be to fit on this forum 50 K?
Well the sound ended up being a broken centre diff cross shaft?
Any idea what could have caused this breakage. I tought LT 230 were among the most durable.
Could it be from the 36" tyres?
I will post up some pics tomorow how much should they be to fit on this forum 50 K?
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
looks like it to.
still same applies the 23 piece cross is what lets go.
fit a jacmac 1 piece cross they cost about $ 150.00
Michael.
still same applies the 23 piece cross is what lets go.
fit a jacmac 1 piece cross they cost about $ 150.00
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Re: Damaged Centre Diff Cross
spinning wheels offroad without difflock engaged.Jay wrote:Hey
Well the sound ended up being a broken centre diff cross shaft?
Any idea what could have caused this breakage. I tought LT 230 were among the most durable.
Could it be from the 36" tyres?
I will post up some pics tomorow how much should they be to fit on this forum 50 K?
not the tyres IMHO
Defender 90 Modified
Defender 110XS Standard
[url=http://www.lr4x4.com]lr4x4.com[/url]
Defender 110XS Standard
[url=http://www.lr4x4.com]lr4x4.com[/url]
Re: Damaged Centre Diff Cross
yes it is the T-case center diff shaft that broke....is it common on rovers?tony cordell wrote:spinning wheels offroad without difflock engaged.Jay wrote:Hey
Well the sound ended up being a broken centre diff cross shaft?
Any idea what could have caused this breakage. I tought LT 230 were among the most durable.
Could it be from the 36" tyres?
I will post up some pics tomorow how much should they be to fit on this forum 50 K?
not the tyres IMHO
Have any one of you upgrade it?
I ve never spun tyres with diff lock not engaged could it be from slow crawl (1st low 4.75 ratio)?
You do not have the required permissions to view the files attached to this post.
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
From memory Mike Smith blew a centre diff at Ateco a few years back, or it might have been Roger, not sure.
Anyhoo, as an aftermarket is available, it must be a weak link!
Another alternative, go part time, as you replace the centre diff in the conversion process.
And if you damage any other front end components while you're wheeling, you can unlock hubs, go 2wd and drive home.
Anyhoo, as an aftermarket is available, it must be a weak link!
Another alternative, go part time, as you replace the centre diff in the conversion process.
And if you damage any other front end components while you're wheeling, you can unlock hubs, go 2wd and drive home.
MichealHSV Rangie wrote:Go with the jac mac one piece cross.
around $150.00 much stronger.
Michaelo
Is this a common weak like in LR and related to larger tyres?
What about the corss shaft that came on the RR with a center retainer...
Can't rememebr jack mack website and e-mail can you send it.
Thanks
You do not have the required permissions to view the files attached to this post.
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
Jay,
As I told you, I don't recall me EVER breaking mine, if TOny says otherwise, then maybe he's right, I may have lost track of what I've already broke...
Anyways, Michael is right, Cross shaft from JM is GREAT. Their website is http://www.mcnamaradiffs.com.au/ & I recall it being 165 AUST $. This is the peice:
As I told you, I don't recall me EVER breaking mine, if TOny says otherwise, then maybe he's right, I may have lost track of what I've already broke...
Anyways, Michael is right, Cross shaft from JM is GREAT. Their website is http://www.mcnamaradiffs.com.au/ & I recall it being 165 AUST $. This is the peice:
You do not have the required permissions to view the files attached to this post.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Who is online
Users browsing this forum: No registered users and 0 guests